60GHz mmWave Human Fall Detection Sensor - human presence detection sensor
ID: 1195722
5906623496365
zł152.00
Tax included
zł123.58 tax excl.
The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388
Description
MR60FDA2 Sensor Kit is an advanced sensor kit utilizing 60GHz mmWave technology, offering reliable fall detection and human presence sensing. Equipped with a light intensity sensor, an RGB LED indicator, and support for additional sensors and actuators, this kit delivers exceptional responsiveness and a wide range of functionality.
With a built-in XIAO ESP32C6 module and pre-installed ESPHome firmware, the kit enables code-free integration with Home Assistant. Configuring detection zones in ESPHome takes just a few minutes, making it ideal for applications such as health monitoring, safety systems, elderly care, and home automation. The BH1750 light sensor allows precise light intensity monitoring, enhancing automation effectiveness based on environmental conditions. The module features a customizable RGB LED indicator and a port for expanding with additional Grove modules. Furthermore, a free 3D housing design simplifies deployment and customization of the device.
Features
- mmWave technology for human presence detection up to 6 meters and fall detection within a 3x3x3m range
- XIAO ESP32C6 with pre-installed ESPHome firmware
- Light sensor: BH1750 with a range of 1-65,535 lux and up to 100,000 lux measurement capability
- LED Indicator: RGB WS2812 with full customization options
- Grove Port: 1 GPIO for connecting over 300 compatible Grove modules
- Power Supply: 5V/1A, power consumption: 0.5W in standby, 1.4W with an active Grove module
- Detection zone dimensions: 120° horizontal and 100° vertical field of view
- 3D housing design
- Dimensions: 54 x 35 x 22 mm
Kit contains
- 60GHz mmWave sensor module
- XIAO ESP32C6 with pre-installed ESPHome firmware
1195722
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The MR60BHA2 sensor kit uses 60GHz mmWave technology to reliably detect human presence, as well as human breathing and heartbeat detection. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensor modules, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993387
zł151.98
24h
Available quantity: 2
Available
Other products in the same category (16)
A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483
zł215.40
24h
Available quantity: 7
Available
The module with a gesture detection sensor PAJ7620U2 designed for M5Stack sets. He can recognize 9 gestures and communicates via the I2C interface. M5Stack U127
zł79.90
24h
Available quantity: 1
Available
Module with an optical flow sensor PMW3901. It uses a low resolution camera to detect surface movement. It communicates via the SPI interface. Pimoroni PIM453
zł137.53
4 weeks
No product available!
The modPhotoelectric sensor with an LM393 comparator and a 10 mm slot width enables reliable detection of interrupters in applications requiring pulse counting, position detection, and speed measurement. Thanks to its digital TTL output and mounting holes, it is suitable for direct integration with microprocessor systems. modPhotoelectric
zł5.83
4 weeks
No product available!
Waveshare Photo Interrupter Sensor is an IR optical sensor module with Schmitt trigger and a signaling diode allowing the construction of an incremental encoder. Waveshare Photo Interrupter Sensor
zł11.80
4 weeks
No product available!
PIR motion sensor module for Arduino and Raspberry Pi. DFRobot SEN0018
zł19.64
24h
Available quantity: 2
Available
This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses 1.6mA@3.3V. SEN-13285
zł54.78
24h
Available quantity: 1
Available
Module with PIR motion sensor SR-602. It can detect movement up to 5 meters
zł5.42
24h
Available quantity: 94
Available
Module with a PIR motion sensor. It allows you to detect movement at a distance of up to 8 meters with a viewing angle of 60°. DFRobot SEN0522
zł40.28
24h
Available quantity: 2
Available
Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083
zł60.29
4 weeks
No product available!
Elenco AK-510 Motion Detector Kit
zł111.17
24h
Available quantity: 1
Available
Finder 18.31.8.230.0031 is a PIR sensor for flush mounting, controlling a single NO contact rated at 10 A at 230 V AC. Ideal for automatic indoor lighting control, it is mounted in suspended ceilings and ensures reliable and safe operation.
zł364.94
24h
Available quantity: 1
Available
A small module with a PIR motion sensor. It allows detecting movement within a maximum range of 6 meters (default up to 3 meters). The measuring angle is 120 degrees. The module has a connector in accordance with the Grove standard. Seeed Studio 101020020
zł49.90
24h
Available quantity: 2
Available
A digital shock sensor that detects hand shake. The spring-type vibration switch allows you to output pulses when the user shakes once in a certain direction. DFRobot SEN0289
zł11.54
24h
Available quantity: 7
Available
Crowtail-Microwave Sensor 2.0 is a motion sensor module based on the Doppler effect, designed for integration with Arduino and Crowduino platforms. Thanks to its resistance to environmental factors, it is suitable for industrial automation, security systems and smart installations.
zł31.00
24h
Available quantity: 4
Available
Module with trackball and RGB backlight. It has a built-in button and is perfect for building your own mouse, for example. Pimoroni PIM447
zł81.98
24h
Available quantity: 4
Available
The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388