 
        
           
        
          Module with PIR BTE16-19 motion sensor. It can detect movement up to 5 meters with a detection angle of 120 degrees. It uses an infrared signal generated by the body, e.g. a human, and the output signal is triggered by movement. It is perfect for alarm system designs as a motion detector or as a light switch on and off sensor. The module can work with the majority of development tiles, incl. popular Arduino sets.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Cables for evaluation boards, set of 10 pcs., blue colour
Cables for evaluation boards, set of 10 pcs., red colour
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
Comprehensive development platform for Espressif ESP32 a WiFi-compatible microcontroller and nearly 30 I/O pins. DEV-13907
Waveshare Photo Interrupter Sensor is an IR optical sensor module with Schmitt trigger and a signaling diode allowing the construction of an incremental encoder. Waveshare Photo Interrupter Sensor
 No product available!
Universal weather station for measuring wind speed and direction, temperature, humidity and atmospheric pressure, compatible with micro:bit, Raspberry Pi, ESP32 and Unihiker controllers. It has 16 MB of internal memory, which allows for 160 days of data storage at a minute sampling rate, and data can be exported via USB Type-C port. The sturdy metal casing with a waterproof protective coating and compatibility with tripods make the station ideal for field atmospheric research and educational projects. DFRobot EDU0157-EN
 No product available!
Wind speed sensor 0-70 m/s made of durable polycarbonate, offers high accuracy and fast response time. It is equipped with RS485 interface. Suitable for agricultural, meteorological and industrial applications. The set includes a sensor, cable and mounting kit.
 No product available!
The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0543
A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483
Finder 18.31.8.230.0031 is a PIR sensor for flush mounting, controlling a single NO contact rated at 10 A at 230 V AC. Ideal for automatic indoor lighting control, it is mounted in suspended ceilings and ensures reliable and safe operation.
A set for building a weather station equipped with a rainfall sensor and a wind speed and direction meter. SparkFun SEN-15901
The module with the BS312 PIR sensor, which allows motion detection at a distance from 3.2 to 12 m. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020793
The modPhotoelectric sensor with an LM393 comparator and a 10 mm slot width enables reliable detection of interrupters in applications requiring pulse counting, position detection, and speed measurement. Thanks to its digital TTL output and mounting holes, it is suitable for direct integration with microprocessor systems. modPhotoelectric
 No product available!
Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020353
Doppler radar module with 24GHz BGT24LTR11 transceiver. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020021
Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377
This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses 1.6mA@3.3V. SEN-13285
 No product available!
The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0561
The MR60BHA2 sensor kit uses 60GHz mmWave technology to reliably detect human presence, as well as human breathing and heartbeat detection. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensor modules, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993387
Occupancy sensor based on 24 GHz millimeter wave technology with FMCW, enabling precise detection of people, measuring distances up to 25 m and movement speed. Thanks to high resistance to environmental interference, it works reliably in conditions such as dust, light or temperature changes, outperforming traditional PIR and ultrasonic sensors. Compact size and installation flexibility make it perfect for intelligent lighting, security systems and building automation. DFRobot SEN0609
 
                    Module with a PIR motion sensor. It can detect movement up to 5 meters with a detection angle of 120 degrees