.png)
PIR Stick - PIR motion sensor for Tiny FX
ID: 1198994
769894026229
zł39.06
Tax included
zł31.76 tax excl.
A passive infrared motion sensor designed for Tiny FX projects and interactive installations. It detects motion within a 3-5m range and generates a simple 3.3V digital signal, ideal for triggering lighting effects and animations. Adjustable sensitivity, a wide viewing angle, and very low current draw make it ideal for battery-powered projects. The module is completely ready to use and can be connected without soldering using a JST-SH connector. Pimoroni PIM749
Description
PIR Stick is a compact motion sensor based on passive infrared (PIR) technology, designed specifically for Tiny FX projects. It enables easy and reliable triggering of lighting effects or animations when motion is detected within its field of view. The sensor responds to changes in thermal radiation emitted by people and other warm objects, making it ideal for interactive installations. Upon detecting motion, it generates a simple digital signal that can be read by a microcontroller. The PIR Stick features a dedicated connector that allows direct, solder-free connection to Tiny FX.
An onboard potentiometer allows precise adjustment of the sensor sensitivity, making it easy to tailor its operation to a specific application. Its small size makes the module easy to integrate into finished projects or enclosures. Thanks to its low power consumption, it is well suited for battery-powered installations. The sensor can also be used with various microcontrollers, making it a versatile solution. A wide field of view and a detection range of several meters enable effective motion detection indoors. It is an ideal choice for presence-reactive effects, interactive decorations, and DIY projects.
Features
- PIR sensor: Senba S18-L262B-2
- Output signal type: digital (3.3 V / 0 V)
- Supply voltage: 2.2 V to 3.7 V
- Maximum current consumption: 14 µA
- Sensitivity adjustment via potentiometer
- Delay time: 0 s
- Block time: 2 s
- Field of view: 80° (horizontal), 55° (vertical)
- Detection range: 3 – 5 m
- 3-pin JST-SH connector
Kit contains
- PIR Stick for Tiny FX
- 3-pin JST-SH cable (approx. 150 mm)
1198994
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
LED and audio controller designed for lighting effects in LEGO® compatible models, dioramas and decorations. It offers six mono channels, one RGB channel, audio amplifier, sensor inputs and a Qw/ST connector – all without the need for soldering. It enables the creation of advanced animations, lighting effects and synchronized audio in a compact form factor. Pimoroni PIM719
zł226.57
24h
Available quantity: 1
Available
LED and audio controller designed for lighting effects in LEGO® compatible models, dioramas and decorations. It offers six mono channels, one RGB channel, audio amplifier, sensor inputs and a Qw/ST connector – all without the need for soldering. It enables the creation of advanced animations, lighting effects and synchronized audio in a compact form factor. Pimoroni PIM718
zł110.60
Delivery date unknown
No product available!
LED adapters that allow easy control of LEDs (dimming, flickering, pulsing) in Tiny FX based projects. They feature AVX 9276 connectors and built-in 33Ω resistors, eliminating the need for soldering and external components. Compact and durable, they are great for models, LEGO® scenes and light decorations. Pimoroni PIM751
zł73.53
24h
Available quantity: 3
Available
Other products in the same category (16)
Module with PIR EKMB1107112 motion sensor, power consumption in standby mode up to 1 uA. The board communicates via I2C and is equipped with a Qwiic connector. SparkFun SEN-17375
zł165.52
24h
Available quantity: 1
Available
Sensor for measuring the horizontal wind direction. It has a built-in Hall sensor and allows you to determine one of 16 directions. DFRobot SEN0482
zł237.67
24h
Available quantity: 6
Available
A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483
zł242.20
24h
Available quantity: 17
Available
Module with an optical flow sensor PMW3901. It uses a low resolution camera to detect surface movement. It communicates via the SPI interface. Pimoroni PIM453
zł146.07
4 weeks
No product available!
Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377
zł339.15
24h
Available quantity: 1
Available
Module with trackball and RGB backlight. It has a built-in button and is perfect for building your own mouse, for example. Pimoroni PIM447
zł81.98
4 weeks
No product available!
The module with a gesture detection sensor PAJ7620U2 designed for M5Stack sets. He can recognize 9 gestures and communicates via the I2C interface. M5Stack U127
zł79.90
24h
Available quantity: 1
Available
Doppler radar module with 24GHz transceiver. It allows for precise distance measurement and motion detection. The board communicates via the UART interface. Seeed Studio 101990883
Regular pricezł122.72zł107.35
24h
Available quantity: 1
Available
Module with a PIR motion sensor. It allows you to detect movement at a distance of up to 8 meters with a viewing angle of 60°. DFRobot SEN0522
zł32.66
24h
Available quantity: 2
Available
A module with a motion sensor that uses microwaves to detect moving objects. It is powered with the voltage of 5 V and has a digital output. DFRobot SEN0521
zł74.51
24h
Available quantity: 1
Available
Module with STP201M motion sensor with pedometer function. Built on the basis of an accelerometer and MCU, dedicated to sports bands and smartwatches
zł34.50
24h
Available quantity: 3
Available
Module with PIR sensor HC-SR501. It can detect movement up to 7 meters with a detection angle of 120 degrees
zł11.41
24h
Available quantity: 4
Available
IR optical sensor module based on a slotted optocoupler. It enables the construction of an incremental encoder
zł9.42
24h
Available quantity: 10
Available
Digital sensor for measuring accurate and drift-free angular displacement. It is constructed from highly durable medical-grade silicone elastomers. It communicates via an I2C interface. SparkFun SEN-15244
zł389.00
3 weeks
No product available!
The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0543
zł92.99
24h
Available quantity: 3
Available
The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0561
zł103.23
24h
Available quantity: 1
Available
A passive infrared motion sensor designed for Tiny FX projects and interactive installations. It detects motion within a 3-5m range and generates a simple 3.3V digital signal, ideal for triggering lighting effects and animations. Adjustable sensitivity, a wide viewing angle, and very low current draw make it ideal for battery-powered projects. The module is completely ready to use and can be connected without soldering using a JST-SH connector. Pimoroni PIM749