

zł45.80 tax excl.
The Gravity Occupancy Sensor uses 24 GHz FMCW radar technology, enabling precise presence detection at a distance of up to 8 meters and movement and distance measurement up to 12 meters. Thanks to its high resistance to environmental interference, it works reliably regardless of light, temperature or dust, effectively detecting both static and dynamic objects. Compatibility with Arduino, ESP32, Raspberry Pi and a simple Gravity interface make it an ideal solution for intelligent lighting, building automation and security systems. DFRobot SEN0610
The Gravity: C4001 presence sensor is a modern device utilizing 24 GHz millimeter-wave radar technology. It offers a horizontal detection angle of 100°, with presence detection range of up to 8 meters and motion detection and distance measurement up to 12 meters. By employing FMCW (Frequency Modulated Continuous Wave) modulation, the sensor accurately detects both distance and speed of moving objects.
Unlike traditional infrared sensors, the C4001 can effectively detect both static and moving objects regardless of environmental conditions such as light, temperature, dust, or noise. It is ideal for applications requiring reliable human presence detection such as smart lighting, building automation, and security systems.
The device is compatible with popular development platforms like Arduino, Raspberry Pi, ESP32, and ESP8266, and communicates via I2C or UART interfaces. Thanks to the Gravity (PH2.0) connector, integration is fast and convenient. The sensor can be installed in various orientations—horizontal, ceiling-mounted, or at an angle—allowing flexible deployment. Its compact size makes it suitable for IoT and embedded system applications.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Doppler radar module with 24GHz transceiver. It allows for precise distance measurement and motion detection. The board communicates via the UART interface. Seeed Studio 101990883
Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001
No product available!
A set with a Doppler radar module and an XIAO ESP32C3 board designed for precise detection of human presence. It allows you to connect additional Grove sensors (analog or with an I2C interface) and expand the functionality. Seeed Studio 110061541
No product available!
Doppler radar module with 24 GHz transceiver. It is based on the S3KM1110 system and allows for precise distance measurement and motion detection. The board communicates via the UART interface. Waveshare HMMD-mmWave-Sensor
A small WiFi module designed for IoT applications. It can communicate with the motherboard via the I2C or UART interface. DFRobot TEL126
Gravity: Digital Crash sensor is a microswitch module (left) often called a limit switch. The module is powered by 5V voltage and has a digital two-state output. DFRobot SEN0138-L
Gravity: Digital Peristaltic Pump is a peristaltic pump with a controller and a connector compatible with modeling servos. The set is powered by 5 ... 6 V. DFRobot DFR0523
Gravity: Digital Capacitive Touch Sensor is a capacitive touch sensor powered by 3.3V ... 5V voltage. DFRobot DFR0030
DC Micro motor module with metal gear with a gear ratio of 50:1. The motor is connected to the board containing the driver. DFRobot DFR0429
A set of 5 modules with a bistable button and LED backlight. The boards are equipped with a Gravity connector and communicate via a digital interface. DFRobot DFR0789
Module with an analog MQ6 propane sensor. It is powered with the voltage of 5 V and has an analog output. DFRobot SEN0131
Gravity: Joystick Module V2 is a joystick module with two analog outputs (X and Y axis) and a digital output (Z axis) supplied with 3.3 ... 5V voltage. DFRobot DFR0061
DFRobot 315MHz RF receiver module using SC2272-L4 low power decoder chip. DFRobot TEL0112
Module with a bistable button and white LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-W
No product available!
Gravity Colorful LED is an LED twinkles with seven colors--the colors of rainbow. DFRobot DFR0474
Module with a 3-axis analog MMA7361 accelerometer. There are 3 Gravity connectors on the board (for each axis). The operating range of the sensor can be configured using a DIP switch. DFRobot DFR0143
Audio module with 8 Ohm loudspeaker and 8002B amplifier. It can be used as a buzzer and also play high-quality sound. The volume is controlled by a potentiometer. DFRobot FIT0449
Module with 9-axis IMU BMX160 sensor (accelerometer, gyroscope and magnetomet) and BMP388 pressure/temperature sensor. Communication via the I2C interface. DFRobot SEN0252
Module with an oxygen concentration sensor in the environment. It allows you to measure the volume of oxygen in the range from 0 to 100%. It communicates via the I2C interface. DFRobot SEN0496
No product available!
Module with an analog light sensor. It consists of a photoresistor and a LED. Equipped with a Gravity connector. DFRobot DFR0022
The Gravity Occupancy Sensor uses 24 GHz FMCW radar technology, enabling precise presence detection at a distance of up to 8 meters and movement and distance measurement up to 12 meters. Thanks to its high resistance to environmental interference, it works reliably regardless of light, temperature or dust, effectively detecting both static and dynamic objects. Compatibility with Arduino, ESP32, Raspberry Pi and a simple Gravity interface make it an ideal solution for intelligent lighting, building automation and security systems. DFRobot SEN0610