zł113.02 tax excl.
Advanced 60 GHz radar, capable of detecting human presence, falls, posture and vital signs such as heart rate and breathing – even when motionless. Ceiling-mounted and compatible with platforms such as Arduino or ESP32, it is ideal for healthcare systems, especially for monitoring sleep and the safety of the elderly. DFRobot SEN0623
The C1001 mmWave Human Detection Sensor is a modern 60 GHz radar designed for precise human presence detection. Unlike standard 24 GHz sensors that only detect movement, speed, and distance, the C1001 model offers extended functionality: fall detection, sleep monitoring, and human posture analysis. Thanks to its point cloud imaging algorithm, the sensor can recognize if a person is lying down and monitor vital signs even when the person is motionless.

The C1001 is ideal for healthcare applications, particularly for monitoring the elderly and patients requiring care. It is compatible with platforms such as Arduino UNO, ESP32, and micro:bit, and the extensive documentation and sample code facilitate rapid deployment. The device operates reliably under diverse conditions, delivering accurate data on presence, heart rate, and breathing rhythm. When mounted on the ceiling (at a height of 2.7 m), it can detect movement within a radius of up to 11 meters. Additionally, the sensor can measure breathing and heart rate from a distance of up to 1.5 meters, providing comprehensive insights into sleep quality.
Manufacturer
Responsible person
Doppler radar module with 24GHz transceiver. It allows for precise distance measurement and motion detection. The board communicates via the UART interface. Seeed Studio 101990883
Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001
The MR60BHA2 sensor kit uses 60GHz mmWave technology to reliably detect human presence, as well as human breathing and heartbeat detection. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensor modules, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993387
The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388
Module with PIR EKMB1107112 motion sensor, power consumption in standby mode up to 1 uA. The board communicates via I2C and is equipped with a Qwiic connector. SparkFun SEN-17375
Sensor for measuring the horizontal wind direction. It has a built-in Hall sensor and allows you to determine one of 16 directions. DFRobot SEN0482
No product available!
A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483
Module with an optical flow sensor PMW3901. It uses a low resolution camera to detect surface movement. It communicates via the SPI interface. Pimoroni PIM453
No product available!
Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377
Module with trackball and RGB backlight. It has a built-in button and is perfect for building your own mouse, for example. Pimoroni PIM447
No product available!
The module with a gesture detection sensor PAJ7620U2 designed for M5Stack sets. He can recognize 9 gestures and communicates via the I2C interface. M5Stack U127
Doppler radar module with 24GHz transceiver. It allows for precise distance measurement and motion detection. The board communicates via the UART interface. Seeed Studio 101990883
Module with a PIR motion sensor. It allows you to detect movement at a distance of up to 8 meters with a viewing angle of 60°. DFRobot SEN0522
A module with a motion sensor that uses microwaves to detect moving objects. It is powered with the voltage of 5 V and has a digital output. DFRobot SEN0521
Module with STP201M motion sensor with pedometer function. Built on the basis of an accelerometer and MCU, dedicated to sports bands and smartwatches
Module with PIR sensor HC-SR501. It can detect movement up to 7 meters with a detection angle of 120 degrees
IR optical sensor module based on a slotted optocoupler. It enables the construction of an incremental encoder
Digital sensor for measuring accurate and drift-free angular displacement. It is constructed from highly durable medical-grade silicone elastomers. It communicates via an I2C interface. SparkFun SEN-15244
No product available!
The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0543
The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0561
Advanced 60 GHz radar, capable of detecting human presence, falls, posture and vital signs such as heart rate and breathing – even when motionless. Ceiling-mounted and compatible with platforms such as Arduino or ESP32, it is ideal for healthcare systems, especially for monitoring sleep and the safety of the elderly. DFRobot SEN0623