

Module with an optical flow sensor PMW3901. It uses a low-resolution camera and dedicated algorithms to detect surface movement. The module communicates via the I2C interface and is supplied with the voltage from 2 to 6 V. It is an ideal solution for correcting the drone's drift by looking for the ground movement in the x/y axis. Documentation with a library and examples in Python is available in the GitHub repository.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Module with pressure, temperature and humidity sensor BME280. It allows to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C interface. Pimoroni PIM472
Expander with two I2C connectors and one SPI for Raspberry Pi Pico. It has sockets compatible with Pimoroni Breakout modules. Pimoroni PIM547
The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388
The module is based on the Acconeer XM125 radar, which uses 60 GHz radar technology, offering distance measurement up to 20 meters and recognition of objects and their movement speed. The sensor is characterized by low power consumption, making it ideal for battery-powered devices, and also allows for various detection modes, such as level measurement or human presence. Supported by the Arduino library and the Acconeer Exploration Tool, the module provides support for monitoring, debugging and configuration, offering a wide range of applications from smart homes to advanced robotics and security systems. SParkFun SEN-24540
Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001
No product available!
A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483
PIR motion sensor module for Arduino and Raspberry Pi. DFRobot SEN0018
The PIR motion sensor module modHC-SR501 is a universal sensor ideal for detecting the presence of people or animals, compatible with Arduino, Raspberry Pi and home automation systems. modHC-SR501
Occupancy sensor based on 24 GHz millimeter wave technology with FMCW, enabling precise detection of people, measuring distances up to 25 m and movement speed. Thanks to high resistance to environmental interference, it works reliably in conditions such as dust, light or temperature changes, outperforming traditional PIR and ultrasonic sensors. Compact size and installation flexibility make it perfect for intelligent lighting, security systems and building automation. DFRobot SEN0609
HLK-LD2450 is a 24 GHz radar module designed for precise human presence and motion detection in intelligent IoT systems. modHLK-LD2405
No product available!
This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses 1.6mA@3.3V. SEN-13285
No product available!
A small module with a PAJ7620U2 gesture detection sensor. Can recognize up to 13 gestures. Communication via the Gravity I2C interface. DFRobot SEN0315
No product available!
Module with the PIR EKMB1107112 motion sensor, the standby power consumption of up to 1 uA. SparkFun SEN-17373
Module with a gesture and touch sensor. It recognizes 7 types of gestures and has 5 touch buttons. It is supplied with a voltage ranging from 3.3 V to 5 V and communicates via UART. DFRobot SEN0285
Module with a PIR motion sensor. It allows you to detect movement at a distance of up to 8 meters with a viewing angle of 60°. DFRobot SEN0522
The modPhotoelectric sensor with an LM393 comparator and a 10 mm slot width enables reliable detection of interrupters in applications requiring pulse counting, position detection, and speed measurement. Thanks to its digital TTL output and mounting holes, it is suitable for direct integration with microprocessor systems. modPhotoelectric
Finder 18.31.8.230.0031 is a PIR sensor for flush mounting, controlling a single NO contact rated at 10 A at 230 V AC. Ideal for automatic indoor lighting control, it is mounted in suspended ceilings and ensures reliable and safe operation.
Module with PIR sensor HC-SR501. It can detect movement up to 7 meters with a detection angle of 120 degrees
Module with an optical flow sensor PMW3901. It uses a low resolution camera to detect surface movement. It communicates via the SPI interface. Pimoroni PIM453