Weather Meter Kit - weather station with rainfall, wind direction and speed sensor
ID: 584241
5906623438563
zł429.00
Tax included
zł348.78 tax excl.
A set for building a weather station equipped with a rainfall sensor and a wind speed and direction meter. SparkFun SEN-15901
Description
A kit for building a weather station. Contains proven SparkFun sensors: wind direction and speed sensor and rain sensor. The set will be used in agriculture, in meteorology and in hobby applications.
The sensors do not contain active electronics, but instead use magnetic reed switches and magnets. They require a power connection for proper operation. Cables terminated with an RJ11 connector are led out of the measuring modules.
The rain sensor is a self-emptying bucket type rain gauge that activates the momentary closure of the circuit when rainfall is detected at 0.2794 mm. The anemometer (wind speed meter) codes the wind speed by generating pulses with each revolution (speed 2.4 km / h generates a pulse once per second). The wind direction is transmitted as the voltage produced by the combination of resistors inside the sensor. The paddle magnet has the potential to close two switches simultaneously, allowing 16 positions to be read.
The kit does not require soldering. Full documentation with assembly instructions is available in the guide on the product page.
Kit contains
- Wind direction sensor
- Wind speed sensor
- Precipitation sensor
- Two-piece mounting mast
- Mounting arm for the rain gauge
- Wind gauge mounting strap
- 2 x cable tie
- 4 x RJ11 cable
584241
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with pressure, humidity and temperature sensor. It uses the I2C interface and allows the connection of additional wind sensors via the RJ11 connector. SparkFun DEV-13674
zł138.50
Delivery date unknown
No product available!
The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. The set contains all the elements needed to build a weather station. Sparkfun KIT-16274
zł898.98
Delivery date unknown
No product available!
Extension board designed for MicroMod main modules. Equipped with a temperature, humidity and pressure sensor BME280, UV sensor VEML6075 and lightning sensor AS3935. SparkFun DEV-16794
zł236.89
Delivery date unknown
No product available!
Other products in the same category (16)
Module with PIR EKMC4607112K motion sensor, power consumption in standby mode up to 170 uA. The board communicates via I2C and is equipped with a Qwiic connector. SparkFun SEN-17374
zł106.12
3 weeks
No product available!
Module with PIR EKMB1107112 motion sensor, power consumption in standby mode up to 1 uA. The board communicates via I2C and is equipped with a Qwiic connector. SparkFun SEN-17375
zł165.52
24h
Available quantity: 2
Available
Sensor for measuring the horizontal wind direction. It has a built-in Hall sensor and allows you to determine one of 16 directions. DFRobot SEN0482
zł214.23
24h
Available quantity: 1
Available
A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483
zł215.40
24h
Available quantity: 2
Available
Module with an optical flow sensor PMW3901. It uses a low resolution camera to detect surface movement. It communicates via the SPI interface. Pimoroni PIM453
zł164.99
24h
Available quantity: 3
Available
Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377
zł339.15
24h
Available quantity: 2
Available
Module with trackball and RGB backlight. It has a built-in button and is perfect for building your own mouse, for example. Pimoroni PIM447
zł81.98
24h
Available quantity: 2
Available
The module with a gesture detection sensor PAJ7620U2 designed for M5Stack sets. He can recognize 9 gestures and communicates via the I2C interface. M5Stack U127
zł79.90
24h
Available quantity: 1
Available
Doppler radar module with 24GHz transceiver. It allows for precise distance measurement and motion detection. The board communicates via the UART interface. Seeed Studio 101990883
zł122.72
24h
Available quantity: 3
Available
Module with a PIR motion sensor. It allows you to detect movement at a distance of up to 8 meters with a viewing angle of 60°. DFRobot SEN0522
zł32.66
24h
Available quantity: 2
Available
A module with a motion sensor that uses microwaves to detect moving objects. It is powered with the voltage of 5 V and has a digital output. DFRobot SEN0521
zł74.51
24h
Available quantity: 2
Available
Module with STP201M motion sensor with pedometer function. Built on the basis of an accelerometer and MCU, dedicated to sports bands and smartwatches
zł34.50
24h
Available quantity: 4
Available
Module with PIR sensor HC-SR501. It can detect movement up to 7 meters with a detection angle of 120 degrees
zł12.12
24h
Available quantity: 5
Available
IR optical sensor module based on a slotted optocoupler. It enables the construction of an incremental encoder
zł8.83
24h
Available quantity: 3
Available
Digital sensor for measuring accurate and drift-free angular displacement. It is constructed from highly durable medical-grade silicone elastomers. It communicates via an I2C interface. SparkFun SEN-15244
zł389.00
3 weeks
No product available!
The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0543
zł92.99
24h
Available quantity: 4
Available
A set for building a weather station equipped with a rainfall sensor and a wind speed and direction meter. SparkFun SEN-15901