PIR Breakout - module with PIR motion sensor EKMB1107112

Doppler radar module with 24GHz transceiver. It allows for precise distance measurement and motion detection. The board communicates via the UART interface. Seeed Studio 101990883

Module with STP201M motion sensor with pedometer function. Built on the basis of an accelerometer and MCU, dedicated to sports bands and smartwatches

The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388

3D Gesture Sensor (Mini) is an inductive gesture sensor detecting such effects as turning clockwise / counterclockwise or the direction of movement. It is powered by 3.3 ... 5V and the range of gesture detection is up to 5cm. DFRobot SEN0202

Module with PIR sensor HC-SR501. It can detect movement up to 7 meters with a detection angle of 120 degrees

The Gravity Occupancy Sensor uses 24 GHz FMCW radar technology, enabling precise presence detection at a distance of up to 8 meters and movement and distance measurement up to 12 meters. Thanks to its high resistance to environmental interference, it works reliably regardless of light, temperature or dust, effectively detecting both static and dynamic objects. Compatibility with Arduino, ESP32, Raspberry Pi and a simple Gravity interface make it an ideal solution for intelligent lighting, building automation and security systems. DFRobot SEN0610

The module is based on the Acconeer XM125 radar, which uses 60 GHz radar technology, offering distance measurement up to 20 meters and recognition of objects and their movement speed. The sensor is characterized by low power consumption, making it ideal for battery-powered devices, and also allows for various detection modes, such as level measurement or human presence. Supported by the Arduino library and the Acconeer Exploration Tool, the module provides support for monitoring, debugging and configuration, offering a wide range of applications from smart homes to advanced robotics and security systems. SParkFun SEN-24540

Module with vibration sensor LDT0-028. The board is equipped with a Grove connector and has a digital output. Seeed Studio 101020031

Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020617

Module with PIR EKMB1107112 motion sensor, power consumption in standby mode up to 1 uA. The board communicates via I2C and is equipped with a Qwiic connector. SparkFun SEN-17375

IR optical sensor module based on a slotted optocoupler. It enables the construction of an incremental encoder

A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483

Crowtail-PIR Motion Sensor 2.0 is a digital motion sensor for use in alarm systems, building automation and interactive projects. It provides a wide detection angle and adjustable range in a compact form with easy connection through the Crowtail interface.

Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001

Module with PIR motion sensor SR-602. It can detect movement up to 5 meters

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses 1.6mA@3.3V. SEN-13285