SparkFun micro:climate v3.0 - weather station kit for micro:bit
ID: 578280
zł898.98
Tax included
zł730.88 tax excl.
The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. The set contains all the elements needed to build a weather station. Sparkfun KIT-16274
Description
SparkFun micro: climate is a complete set for the construction of a weather station. The set supports the Qwiic connection standard. Includes proven SparkFun sensors such as weather gauges and soil moisture sensor. The kit will be used in agriculture, meteorology and hobby applications. By using two micro: bit modules you can establish wireless communication and study the weather from home.
The set does not require soldering. It is a great solution for people interested in meteorology and enthusiasts of the micro: bit platform.
The manufacturer has prepared a guide to sample experimenters at the weather station - link
Note!
The set does not include the micro:bit module, microSD card and two AAA Battery, they must be purchased separately.
The set does not include the micro:bit module, microSD card and two AAA Battery, they must be purchased separately.
Included
- SparkFun weather:bit - the carrier board for the micro:bit and the central component to building a weather station
- Weather Meter - wind speed, direction and rain gauge that connects to the SparkFun weather:bit
- SparkFun Soil Moisture Sensor - a simple probe for measuring soil moisture
- Waterproof Temperature Sensor - waterproof temperature sensor with a long wire
- SparkFun OpenLog - a small widget that logs any data sent to it over a serial connection to a microSD card
- 10-Pack of M/M 12" Jumper Wires
- Screwdriver
578280
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Maxell AAA battery (R3, LR03, small) 1 piece, 1.5V, capacity 1200mAh
zł1.24
24h
Available quantity: 46
Available
Other products in the same category (16)
Micro: Circular RGB LED is an expansion board designed for use with the micro: bit module. It has been equipped with 24 RGB LEDs, a buzzer and a microphone. The board is supplied with voltage in the range of 3.5 ... 5 V. DFRobot ROB0150
zł84.98
24h
Available quantity: 2
Available
Speaker for micro:bit is an expansion module with a loudspeaker designed for micro:bit with volume control and headphone output. Speaker for micro:bit
zł47.98
24h
Available quantity: 1
Available
Expansion module compatible with micro:bit. The board is equipped with a 24 V 2 A relay, two buffer inputs, two sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM371
zł82.73
24h
Available quantity: 3
Available
Module with 17x7 LED matrix display (119 LEDs) designed to work with micro:bit. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM353
zł88.29
24h
Available quantity: 3
Available
Module with a 2-channel DC motor driver TB6612FNG designed to work with micro: bit. It can also control 3 servos. SB Components 14897
zł76.94
24h
Available quantity: 2
Available
The PCA9685 servo driver module is dedicated to micro: bit educational boards. It allows you to control 16 PWM channels. SB Components 09183
zł76.95
24h
Available quantity: 3
Available
The IO expansion module is designed to work with the micro: bit educational board. There are 19 IO pins on the board, a buzzer and a voltage stabilization circuit are placed. DFRobot MBT0008
zł27.71
24h
Available quantity: 1
Available
Transparent case designed for micro:bit educational modules. Compatible with LEGO. DFRobot FIT0533
zł11.55
24h
Available quantity: 4
Available
Protective case for micro:bit modules designed with protection in mind. It is transparent, has large and legible labels for buttons A and B, and full access to the bottom pins of the micro:bit. Kitronik 56102
zł20.58
24h
Available quantity: 9
Available
An accessory from the gator:boards series. The board has large pads dedicated for crocodile-type wires for easy connection to the micro:bit. It includes a temperature sensor module (MCP9700), a light sensor (TEMT6000) and an RGB LED board. SparkFun SEN-14891
zł38.90
3 weeks
No product available!
Transparent case made of tinted plastic, designed for micro:bit educational modules. Adafruit 4852
zł16.29
24h
Available quantity: 3
Available
The IO expansion module is designed to work with the micro:bit educational board. There are 20 GPIO pins on the board, a buzzer and a voltage stabilization circuit
zł33.63
24h
Available quantity: 1
Available
The module with six touch buttons and LED diodes is designed for micro:bit. It uses the CAP1166 driver and communicates via the I2C interface. Pimoroni PIM401
zł66.19
24h
Available quantity: 2
Available
The expansion module with 6 Grove connectors for the micro:bit educational module. Seeed Studio 114991848
zł54.98
4 weeks
No product available!
Board with goldpin connectors designed for micro:bit sets. It enables connection of a micro: bit set and attaching a module with connectors, eg to a contact plate. Adafruit 3695
zł50.54
4 weeks
No product available!
Module with RFID reader designed to work with micro:bit. It is equipped with a buzzer and can control two modeling servos. SB Components 21291
zł115.60
24h
Available quantity: 2
Available
The SparkFun micro:climate kit is a full weather station kit that is built on top of the weather:bit carrier board. The set contains all the elements needed to build a weather station. Sparkfun KIT-16274