New products
New products New products
zł9,349.00
4 weeks
zł173.58
Delivery date unknown
Grove Digital PIR Sensor - module with PIR motion sensor
ID: 583088
5906623415267
zł22.41
Tax included
zł18.22 tax excl.
The module with the BS312 PIR sensor, which allows motion detection at a distance from 3.2 to 12 m. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020793
Description
Module with the PIR BS312 motion sensor, which allows you to detect motion at a distance of 3.2 to 12 meters with a detection angle of 100 degrees. It uses an infrared signal generated from the body, e.g. a human, and the output signal is triggered by movement. The board is equipped with a Grove connector, so it can be used with the Base Shield V2 and Arduino extension. The module communicates via a digital interface (high state after motion detection) and is powered with the voltage from 3.3 V to 5 V. Full documentation with examples of use is available on the product page.
Features
- Detection angle: 100°
- Detection distance: 3.2 to 12 m
- Digital interface
- Supply voltage: 3.3 V to 5 V
- Dimensions: 20 x 20 x 11.5 mm
- Weight: 3 g
Kit contains
- Grove Digital PIR Sensor
- Grove cable
583088
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 240
Available
A set with ATmega2560 microcontroller (256 kB Flash, 8 kB RAM, 4 kB EEPROM) clocked at 16 MHz. The user has, among others: 54 I / O lines, 14 PWM channels, 16 analog inputs. Arduino A000067
zł189.00
Delivery date unknown
No product available!
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 17
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
Other products in the same category (16)
Module with four gas sensors that allow the detection of CO, NO2, alcohol and volatile organic compounds (VOC). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020820
zł158.82
24h
Available quantity: 2
Available
Module with an incremental encoder with a rotation range of 360°. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020001
zł27.43
24h
Available quantity: 4
Available
Waterproof strip with RGB LED diodes, 1 m long (60 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020109
zł51.83
24h
Available quantity: 2
Available
The expansion module is designed for Arduino Mega and Google ADK boards. It is equipped with connectors to which you can attach modules compatible with the Grove standard. Seeed Studio 103020027
zł27.36
24h
Available quantity: 4
Available
A small servo (23 x 11.5 x 24 mm) with a weight of 8.6 g, power supply 4.8-6V, maximum torque 1.8 kg / cm (at 6V). It has a connector compatible with the Grove standard. Seeed Studio 316010005
zł36.11
24h
Available quantity: 2
Available
Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599
zł79.54
4 weeks
No product available!
Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049
zł38.14
24h
Available quantity: 2
Available
Module with 42 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020173
zł120.42
24h
Available quantity: 1
Available
A small module - an infrared emitter (LED IR). The diode emits infrared light with a wavelength of 940 nm. With the help of the module, it is possible to transmit commands or signals that can be received by an infrared receiver. The transmission range is up to 10 meters. Seeed studio 101020026
zł18.45
24h
Available quantity: 3
Available
Module with 2-element 14-segment display with red backlight. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 104020132
zł37.20
24h
Available quantity: 3
Available
A set of necessary tools needed to perform vehicle diagnostics. It consists of a CAN Bus module, an OBD II connector and the necessary wires. Seeed Studio 114991438
zł104.00
4 weeks
No product available!
Controller with 5 m RGB LED strip (10 LEDs per meter). The LEDs are mounted on a flexible white PCB. Communication is via the Grove interface. Seeed Studio 104020005
zł91.65
24h
Available quantity: 2
Available
Waterproof strip with RGB LED diodes, 1 m long (30 LEDs per meter). The LEDs are mounted on a flexible white PCB, the tape has a Grove connector. Seeed Studio 104020108
zł32.75
24h
Available quantity: 2
Available
Module with a pressure sensor DPS310 with high measurement accuracy. The board is equipped with a Grove connector and communicates via the I2C or SPI interface. Seeed Studio 101020812
zł43.39
24h
Available quantity: 2
Available
Module with LCD display 16x2 characters with black text and yellow backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104020113
zł29.91
24h
Available quantity: 2
Available
Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472
zł21.33
24h
Available quantity: 2
Available
The module with the BS312 PIR sensor, which allows motion detection at a distance from 3.2 to 12 m. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020793