

Module with a PIR motion sensor. It can detect movement up to 7 meters with a detection angle of 100 degrees. It uses an infrared signal generated from the body, e.g. a human, and the output signal is triggered by movement. The module has a connector compatible with the Gravity standard. The sensor is designed to work with Arduino and Raspberry Pi. The user manual and sample programs are available on the Wiki page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
PIR motion sensor module for Arduino and Raspberry Pi. DFRobot SEN0018
Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377
The Gravity Occupancy Sensor uses 24 GHz FMCW radar technology, enabling precise presence detection at a distance of up to 8 meters and movement and distance measurement up to 12 meters. Thanks to its high resistance to environmental interference, it works reliably regardless of light, temperature or dust, effectively detecting both static and dynamic objects. Compatibility with Arduino, ESP32, Raspberry Pi and a simple Gravity interface make it an ideal solution for intelligent lighting, building automation and security systems. DFRobot SEN0610
A module with a motion sensor that uses microwaves to detect moving objects. It is powered with the voltage of 5 V and has a digital output. DFRobot SEN0521
Sensor for measuring the horizontal wind direction. It has a built-in Hall sensor and allows you to determine one of 16 directions. DFRobot SEN0482
The modPhotoelectric sensor with an LM393 comparator and a 10 mm slot width enables reliable detection of interrupters in applications requiring pulse counting, position detection, and speed measurement. Thanks to its digital TTL output and mounting holes, it is suitable for direct integration with microprocessor systems. modPhotoelectric
No product available!
Module with PIR EKMB1107112 motion sensor, power consumption in standby mode up to 1 uA. The board communicates via I2C and is equipped with a Qwiic connector. SparkFun SEN-17375
The GR10-30 sensor module, which can recognise up to 12 user gestures from a distance of up to 30 cm. It supports communication via both UART and I2C interfaces. DFRobot SEN0543
A set for building a weather station equipped with a rainfall sensor and a wind speed and direction meter. SparkFun SEN-15901
Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001
No product available!
Module with PIR EKMC4607112K motion sensor, power consumption in standby mode up to 170 uA. The board communicates via I2C and is equipped with a Qwiic connector. SparkFun SEN-17374
A sensor for measuring the wind speed. It has a built-in Hall sensor and enables measurements in the range from 0 to 32.4 m/s. DFRobot SEN0483
A small module with a PIR motion sensor. It allows detecting movement within a maximum range of 6 meters (default up to 3 meters). The measuring angle is 120 degrees. The module has a connector in accordance with the Grove standard. Seeed Studio 101020020
Gravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221
Energy-saving 24 GHz sensor LD2410S based on FMCW technology and the Doppler effect, designed to detect human presence and micro-movements in real time. Thanks to the built-in AI algorithm and a range of up to 8 meters and a wide detection angle (±60°), it is perfect for building automation, smart lighting and IoT devices. It supports UART and GPIO interfaces, offers very low power consumption (from 0.04 mA in standby mode) and allows configuration through intuitive tools, making it ideal for integration in modern projects.
Module with a PIR motion sensor. It can detect movement up to 7 meters with a detection angle of 100 degrees. DFRobot SEN0171