The module with the UART-RS485 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3485 chip and enables data transmission between the UART interface and the RS485 device. Waveshare Pico-2CH-RS485

360-degree laser scanner (LIDAR), with a range of up to 12 meters and measurement frequency up to 10 Hz (optimal value 5.5 Hz). DFRobot DFR0315

Access line ultra-low-power 32-bit MCU ARM®-based Cortex®-M0+, 64 KB Flash, 8 KB SRAM, 2 KB EEPROM, ADC, LQFP48, RoHS

LED strip with COB diodes in golden yellow. It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20

The Sunon A2-20.GN is a 2-meter power cable designed for fans with connector terminals. It provides a safe and convenient power connection for use in industrial and service applications.

The 24C02CT-I/ST is a low-voltage, energy-efficient 2 kbit EEPROM memory with an I²C interface, optimized for reliable storage of configuration data in industrial, consumer, and embedded applications. Its TSSOP-8 package and long data retention make it suitable for integration into compact electronic systems.

Distance Measuring Sensor Unit Digital output (100 mm) type, voltage 2.7V-6.2V, Sharp, RoHS

Akyga AK-USB-16 is a 1-meter USB 2.0 cable with a USB micro-B and C plug, enabling data transmission and powering various devices. Akyga AK-USB-16

STM32L552RET6, Ultra-low-power with FPU Arm Cortex-M33 with Trust Zone, MCU 110 MHz with 512 kbytes of Flash memory, LQFP64

BLE Beacon transmitting Bluetooth signals at regular intervals. These signals can be detected by Bluetooth-enabled devices such as the SenseCAP T1000 tracker, allowing them to determine their distance from the beacon, creating a location-based indoor positioning solution. Seeed Studio 113991194

Two-channel driver of direct current (DC) motors with an operating voltage from 4 to 16 V and a maximum continuous current of 3 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD3A

HDMI cable compliant with the HDMI High Speed with Ethernet specification, allows you transmit a 4k resolution image at 30 Hz, 1,8m cable length. LANBERG z27510

Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 W and communicates via an I2S interface. DFRobot DFR0954

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-200mm

Flexible LED (LED filament) in green, length 130 mm

Akyga AK-USB-04 is a 1.8-meter USB 2.0 cable that allows you to connect devices with USB A and USB B ports. It is mainly used for data transmission between peripheral devices, such as printers or scanners, and a computer or laptop. Akyga AK-USB-04

15 cm long cable with plug and XT60 socket. It allows you to connect a battery with an XT60 socket, e.g. to a charger

WiFiBee-MT7681 is an XBee module based on the MT7681 Wi-Fi module. WiFiBee supports standard IEEE802.11b / g / ni protocols. Can be used as a remote programmer for Arduino tiles. It is powered by 3.3 V. DFRobot TEL0107

Female-female cable, 10 cm long, with JST-SH 6-pin plug on both sides. Suitable for micro DC motor encoders with gear. Pololu 4765

A 2-channel DAC converter module with an output voltage range from 0 to 10 V. It is powered by 3.3 V to 5 V and communicates via I2C interface (Gravity connector). It is used as a controller in industrial applications. DFRobot DFR0971