MAX98357 I2S Amplifier - 2.5W Class-D audio amplifier module
ID: 1182935
5902186310742
zł26.76
Tax included
zł21.76 tax excl.
Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 W and communicates via an I2S interface. DFRobot DFR0954
Description
Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 watts and communicates via I2S. It allows users to set different modes (off, left channel, right channel and mixed) by changing the resistance on the SD pin (the default is mixed mode). It can work with popular development boards including Raspberry Pi, ESP32 and STM32, which are equipped with I2S audio interface. Thanks to its small size, it will find application in building a small audio player. Full documentation and sample programs are available on the product page.
Features
- Class-D mono amplifier
- Power: 1.8 watts for 8 Ω, 2.5 watts for 4 Ω
- Speaker: 4 to 8 Ω
- I2S interface
- Sampling frequency: 8 to 96 kHz
- Adjustable gain 3 dB, 6 dB, 9 dB, 12 dB, 15 dB
- Support for PCM encoding
- THD: 0.02% (f = 1kHz, POUT = 1W, TA = +25NC, ZSPK = 4I + 33FH, TQFN), 0.013% (f = 1kHz, POUT = 0.5W, TA = +25NC, ZSPK = 8I + 68FH)
- Dynamic range: 105 dB
- Output noise: 25 FVRMS
- Efficiency: 92% (ZSPK = 8I + 68FH, THD+N = 10%, f = 1kHz, gain = 12dB)
- DAC Gain Error: 1%
- Frequency response: ±0.2 dB
- Switching frequency: 330 kHz
- Spread spectrum bandwidth: ±12.5 kHz
- PH2.0 connector for speaker
- SMT edge pads
- Power supply: 3.3 to 5 V
- Dimensions: 18 x 18 mm
Kit contains
- MAX98357 I2S Amplifier module
- 2 x 6-pin straight goldpin connector
1182935
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
1 W loudspeaker with 8 Ω resistance. It has dimensions of 24x15 mm and a thickness of 2.4 mm and soldered wires for easy connection to the amplifier
zł2.61
Delivery date unknown
No product available!
Universal speaker with a power of 1 W and a resistance of 8 Ω. It has a diameter of 57 mm
zł4.05
24h
Available quantity: 43
Available
Other products in the same category (16)
Module with audio amplifier and 8 Ω speaker with a power of 1 W. The board is equipped with a STEMMA connector. Adafruit 3885
zł31.91
24h
Available quantity: 3
Available
Single-channel audio amplifier up to 100 W.
zł65.33
24h
Available quantity: 3
Available
The TPA3116D2 amplifier module is a digital class D amplifier, offering 2x50W of power for stereo channels and 100W for the subwoofer, powered by 12V-24V. Thanks to the built-in NE5532 low-pass filter, it provides clean bass sound, and three potentiometers allow you to adjust the volume and cutoff frequency.
zł64.33
4 weeks
No product available!
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)
zł117.56
24h
Available quantity: 1
Available
Digital audio amplifier dedicated to woofers. It has one channel with a power of 50 W each and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 8 to 25 V
zł43.90
4 weeks
No product available!
Pmod I2S2 is a module with 24-bit A / C and D / C audio converters derived from standard 3,5 mm Jack connectors. Thanks to them, it is possible to send and receive stereo audio signals using the I2S protocol. Digilent 410-379
zł131.61
24h
Available quantity: 5
Available
TEA2025B class D stereo digital audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 16 Ω and a power of 3 W each
zł14.91
24h
Available quantity: 8
Available
Audio preamplifier based on NE5532 chips. Equipped with an input selector function. Display and remote control included
zł182.16
24h
Available quantity: 2
Available
TDA7297 stereo audio digital amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 15 W
zł14.88
4 weeks
No product available!
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
zł138.45
4 weeks
No product available!
The 2x40W Bluetooth amplifier module XY-P40W is a versatile audio amplifier with a wide voltage range and Bluetooth 5.0 compatibility, enabling wireless audio transmission at a distance of up to 15 meters. It has protective mechanisms that make it not only a powerful but also a safe tool for designing your own audio devices.
zł19.90
4 weeks
No product available!
Class D PAM8304 stereo digital audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3 W
zł8.98
24h
Available quantity: 10
Available
Module with two operational amplifiers OPA627
zł24.39
24h
Available quantity: 54
Available
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
zł134.55
24h
Available quantity: 2
Available
TDA7266 stereo digital audio amplifier module. The system allows you to connect two speakers with an impedance of 4 to 8 Ω and a power of 7 W
zł16.40
4 weeks
No product available!
The module with a digital stereo audio amplifier is equipped with Bluetooth communication. The system allows you to connect two speakers with an impedance of 6 Ω or 8 Ω with a power of 6 W per channel
zł38.29
24h
Available quantity: 3
Available
Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 W and communicates via an I2S interface. DFRobot DFR0954