TPA3116D2 2x100W 12V-24V stereo audio amplifier
ID: 1181580
5906623444625
zł129.38
Tax included
zł105.19 tax excl.
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 100 W
Description
Digital audio amplifier based on the TPA3116D2 chip. It has two channels with a power of 100 W and can work with speakers with an impedance from 2 to 8 Ω. The module is supplied with the voltage ranging from 12 to 24 V through the screw connection. The user has a potentiometer to adjust the volume level. The audio input can be connected via a 3-pin connector or a Jack socket, while the outputs are led out on screw connectors. It can be used as an element of a home audio system.
Features
- Power supply: screw connection
- Audio input: 3-pin connector, audio Jack
- Potentiometer to adjust the volume
- Frequency response: 20Hz-20kHz
- Speaker impedance: 2-8 Ω
- Signal to noise ratio: 100db
- Voltage range: DC 12 to 24V
- Power: up to 100 W per channel
- Dimensions: 105 x 65 mm
1181580
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
zł84.32
Delivery date unknown
No product available!
Audio amplifier with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass). Equipped with Bluetooth 5.0 communication
zł108.19
24h
Available quantity: 10
Available
The module with a digital stereo audio amplifier is equipped with Bluetooth communication. The system allows you to connect two speakers with an impedance from 4 Ω to 8 Ω and a power of 15 W per channel
zł42.75
Delivery date unknown
No product available!
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered with the voltage from 12 to 26 V and has two outputs with a power of 120 W
zł46.70
24h
Available quantity: 50
Available
Other products in the same category (16)
Audio module with DAC, amplifier, display and loudspeaker, designed to work with the Raspberry Pi. Pimoroni PIM485
zł157.78
24h
Available quantity: 2
Available
Digital audio amplifier dedicated to woofers. It has one channel with a power of 50 W each and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 8 to 25 V
zł43.90
4 weeks
No product available!
Module of a stereo 24-bit audio converter with I2S interface (TS4657).
zł59.00
24h
Available quantity: 66
Available
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered with the voltage from 12 to 26 V and has two outputs with a power of 120 W
zł46.70
24h
Available quantity: 50
Available
Module with an AB class amplifier based on the Boomer® LM4853 system. It can work in two modes: mono (power 1.5 W, load 4 Ω) or stereo (power 300 mW, load 8 Ω). It has a potentiometer for power control and gain control for the left and right channel. SparkFun DEV-14475
zł95.58
24h
Available quantity: 3
Available
Module with class D mono audio amplifier designed for QT Py and Xiao boards. It is based on the MAX98357 system and can work with a loudspeaker from 4 to 8 Ω with a power of up to 3 W. It communicates via the I2S interface. Adafruit 5770
zł26.32
24h
Available quantity: 1
Available
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
zł613.40
24h
Available quantity: 1
Available
50 W audio signal converter that reduces the speaker signal from the player to the level of RCA inputs. It allows you to connect the radio to an external power amplifier. Fwaeh FH-103
zł25.37
24h
Available quantity: 1
Available
Audio preamplifier based on the NE5532 chip. Powered with DC voltage in the range from 9 to 35 V (does not require symmetrical voltage)
zł15.47
4 weeks
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
zł134.55
24h
Available quantity: 2
Available
Audio amplifier module with three output channels. It can be powered from 12 to 24 V and has two 50 W outputs (left and right) and one 100 W output (bass). Equipped with Bluetooth 5.0 communication
zł114.78
4 weeks
No product available!
Audio preamplifier based on NE5532 chips. Equipped with an input selector function. Display and remote control included
zł182.16
24h
Available quantity: 2
Available
Class D digital audio amplifier with Bluetooth module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage in the range from 9 to 24 V. NS-01G
zł136.53
4 weeks
No product available!
The Class D digital audio amplifier module has two channels with a power of 30 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication
zł29.67
24h
Available quantity: 18
Available
Class D mono digital audio amplifier module PAM8302. The system allows you to connect one loudspeaker with an impedance from 4 to 8 Ω and a power of 2.5 W
zł5.22
24h
Available quantity: 25
Available
Stereo audio amplifier with Bluetooth communication. It can be powered with the voltage from 8 to 26 V and has two outputs with a power of 50 W. The set includes a remote control
zł58.49
4 weeks
No product available!
Stereo audio amplifier based on the TPA3116D2 chip. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 100 W