![SJ2038 2x3,5W 2-6V stereo audio amplifier module](https://kamami.pl/80641-large_default/sj2038-2x35w-2-6v-stereo-audio-amplifier-module.jpg)
![SJ2038 2x3,5W 2-6V stereo audio amplifier module](https://kamami.pl/80641-large_default/sj2038-2x35w-2-6v-stereo-audio-amplifier-module.jpg)
zł7.20 tax excl.
SJ2038 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3.5 W
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
SJ2038 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3.5 W. The board is powered with the voltage from 2 to 6 V and is equipped with a potentiometer to adjust the gain. The supply voltage and control signals are connected through the goldpin connector, and the speakers through the screw connector.
Class D mono digital audio amplifier module PAM8302. The system allows you to connect one loudspeaker with an impedance from 4 to 8 Ω and a power of 2.5 W
Class D stereo digital audio amplifier module PAM8403. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3 W
LM386 mono digital audio amplifier module. The system allows you to connect a loudspeaker with a power of up to 10 W. Kit for self-assembly
PAM8610 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 10 W
PAM8302 Class D mono digital audio amplifier module. The system allows you to connect one loudspeaker with an impedance of 4 to 8 Ω and a power of 2.5 W. The board is equipped with a STEMMA connector. Adafruit 5647
Single-channel audio amplifier up to 100 W.
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage ranging from 9 to 24 V
Audio module with DAC, amplifier, display and loudspeaker, designed to work with the Raspberry Pi. Pimoroni PIM485
No product available!
Class A power amplifier with two channels, 45 W. Built on the popular J. Hood design from 1969
Audio amplifier based on the TPA3255 system with a power of 600 W with an active filter. Dedicated to the bass column (subwoofer)
Digital audio amplifier dedicated to woofers. It has two channels with a power of 50 W each and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 8 to 25 V
Class A power amplifier with one channel (mono) with the power of 10 W. Built on the popular design of J. Hood from 1969
LM386 audio amplifier module. It is supplied with the voltage ranging from 4 to 12 V. The set includes an 8 Ω, 0.5 W loudspeaker. DFRobot DFR0064
A stereo tube preamplifier based on 6K4 tubes. Designed for use with active speakers or an additional amplifier and passive speakers. SUCA-AUDIO TUBE-T1
No product available!
Audio amplifier based on the TPA3116 chip with a power of 100 W with an active low-pass filter. Dedicated to the bass column (subwoofer)
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass)
No product available!
PAM8610 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 10 W
WM8960 stereo codec module with driver for 1W class D speakers and headphones. It uses the I2S interface and the I2C bus to configure the system. SparkFun BOB-21772
Class-D mono audio amplifier module based on the MAX98357 chip. It can work with a 4 to 8 ohm speaker of up to 2.5 W and communicates via an I2S interface. DFRobot DFR0954
Module with two operational amplifiers OPA627
SJ2038 digital stereo audio amplifier module. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3.5 W