WiFiBee-MT7681 - XBee module with Arduino wireless programming mode
ID: 564328
5902186312739
zł74.39
Tax included
zł60.48 tax excl.
WiFiBee-MT7681 is an XBee module based on the MT7681 Wi-Fi module. WiFiBee supports standard IEEE802.11b / g / ni protocols. Can be used as a remote programmer for Arduino tiles. It is powered by 3.3 V. DFRobot TEL0107
Description
WiFiBee-MT7681 is an XBee module based on the MT7681 Wi-Fi module. It is powered by 3.3V. WiFiBee supports standard IEEE802.11b / g / n protocols, with 2.4 GHz Wi-Fi bands, 14 channels and WEP / WPA-PSK / WPA2-PSK / TKIP / AES encryption methods. It has STA and AP operating modes, it can switch and support TCP / IP communication. The WiFi Bee module also supports smartLink connection. The device is easy to use - just install the application ( Android ) and connect to the wireless router. It is powered by 3.3V.
The module has pin pins compatible with XBee . In the case of Arduino UNO and Arduino Mega 2560 boards , the WiFi Bee module can also be used as a module for wireless code transfer. This is a very convenient solution for debugging robots or mobile platforms. The device parameters can be configured using AT commands via the serial terminal. The module is ideal for Internet of Things (IoT) applications, home automation and robotic applications.
properties
- Based on the MT7681 layout
- Protocol standard: IEEE802.11 b / g / n
- Wi-Fi range: up to 180 m
- Number of channels: 1 ... 14
- Frequency range: 2.4 ... 2.4835 G
- Transmission power: 15 ... 18 dbm
- Encryption methods: WEP / WPA-PSK / WPA2-PSK / TKIP / AES
- Operating mode: STA mode / AP mode (mixed mode STA and AP is not supported, only one device can be connected in AP mode)
- TCP port 1000: TCP <-> Transparent UART data port
- TCP port 1001: AT command port
- UDP port 3333: transmission port
- Interface: UART serial port
- Transmission speed: 9600, 14400, 19200, 38400, 57600, 115200bps (default)
- Power consumption: 75 mA
- Supply voltage: 3.3 V
- Dimension: 32 x 24 mm
- Weight: 3.5 g
564328
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
24h
Available quantity: 106
Available
Available
Other products in the same category (16)
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. SparkFun WRL-11812
zł170.81
24h
Available quantity: 1
Available
Available
RF module providing wireless connectivity compliant with the IEEE 802.15.4 standard. It operates in the 2.4 GHz ISM band and allows local configuration via BLE with the Digi XBee mobile application. It is equipped with a Silicon Labs EFR32MG SoC transceiver chipset. The range in buildings is up to 90 m, while in open space it reaches up to 3200 m. SparkFun WRL-22627
zł269.74
3 weeks
No product available!
RF module providing wireless connectivity compliant with the IEEE 802.15.4 standard. It operates in the 2.4 GHz ISM band and allows local configuration via BLE with the Digi XBee mobile application. It is equipped with a Silicon Labs EFR32MG SoC transceiver chipset. The range in buildings is up to 60 m, while in open space it reaches up to 1200 m. SparkFun WRL-22626
zł163.26
3 weeks
No product available!
An adapter dedicated to XBee modules. It has UART, USB interface and built-in buttons and LEDs. It provides an easy way for project development and debugging. Waveshare XBee USB Adapter
zł30.71
24h
Available quantity: 6
Available
Base board for Xbee radio modules belonging to the Series 1, Series 2 and Pro families. Equipped with a voltage regulator, 3.3V to 5V level converters and LEDs for Power, RSSI and DIN / DOUT lines. SparkFun WRL-11373
zł85.69
24h
Available quantity: 1
Available
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 90 m, while in open space it reaches up to 3200 m. SparkFun WRL-22631
zł247.73
24h
Available quantity: 1
Available
Adapter for Xbee (ZigBee) radio modules compatible with Teensy 3.1. On the board, the pins of both modules are led out to connectors with a 2.54 mm pitch. SparkFun BOB-13311
zł40.36
3 weeks
No product available!
Available
Evaluation board with STM32W108 microcontroller, STM, RoHS
zł1,501.88
24h
Available quantity: 3
Available
Base board for prototyping IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT and Digi XBee RR modules. It gives access to the full functionality of the XBee module pins, including two USB Type-C connectors for UART communication and firmware updates, a Qwiic connector for I2C-compatible sensors and peripherals. SparkFun WRL-21636
zł106.46
3 weeks
No product available!
2.4 GHz IEEE 802.15.4 power radio transceiver module
Regular pricezł75.34zł63.28
24h
Available quantity: 1
Available
A base board that allows you to integrate modern Digi XBee 3 and Digi XBee RR Pro modules with the Arduino format, enabling you to build wireless projects. It uses a USB Type-C connector and a Qwiic connector to connect I2C sensors. SparkFun WRL-22131
zł60.20
24h
Available quantity: 1
Available
An adapter that allows you to connect modules in the XBee format to a computer via the USB Type-C interface. The adapter is based on the FT231XS system. SparkFun WRL-22043
zł82.41
3 weeks
No product available!
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
zł97.48
24h
Available quantity: 1
Available
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 60 m, while in open space it reaches up to 1200 m. SparkFun WRL-22628
zł165.96
3 weeks
No product available!
WiFiBee-MT7681 is an XBee module based on the MT7681 Wi-Fi module. WiFiBee supports standard IEEE802.11b / g / ni protocols. Can be used as a remote programmer for Arduino tiles. It is powered by 3.3 V. DFRobot TEL0107