zł485.68 tax excl.
SparkFun XBee 3 is a set for wireless communication ideal to start using XBees. These modules enable data transfer from a remote sensor or data transfer from a computer to update the scoreboard or control the robot from the keyboard. Kit-15936
SparkFun XBee 3 is a set that has two XBee 3 modules, one XBee Explorer, one Xbee Shield and a set of Arduino R3 headers for soldering on a shield. XBee Shield works directly with the Arduino Pro or USB card and equips it with wireless communication functions using the popular XBee module. Power is taken from the 5 V Arduino pin and regulated on board to 3.3 V DC before delivery to XBee. The board also contains LEDs indicating power and activity on DIN, DOUT, RSSI and DIO5 XBee pins. The Arduino reset button is on the dial, and a 12 x 11 grid of 0.1" holes is available for prototyping.
Manufacturer
Responsible person
Board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
Base board for Xbee radio modules belonging to the Series 1, Series 2 and Pro families. Equipped with a voltage regulator, 3.3V to 5V level converters and LEDs for Power, RSSI and DIN / DOUT lines. SparkFun WRL-11373
No product available!
Shield - Xbee w / o RF module
Base board for Xbee radio modules belonging to the Series 1, Series 2 and Pro families. Equipped with a voltage regulator, 3.3V to 5V level converters and LEDs for Power, RSSI and DIN / DOUT lines. SparkFun WRL-11373
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. SparkFun WRL-11812
Adapter for Xbee (ZigBee) radio modules compatible with Teensy 3.1. On the board, the pins of both modules are led out to connectors with a 2.54 mm pitch. SparkFun BOB-13311
No product available!
No product available!
WiFiBee-MT7681 is an XBee module based on the MT7681 Wi-Fi module. WiFiBee supports standard IEEE802.11b / g / ni protocols. Can be used as a remote programmer for Arduino tiles. It is powered by 3.3 V. DFRobot TEL0107
Cap for Xbee and Arduino. It has been designed for wireless sensor networks such as WiFi, Bluetooth 2.0 / 4.0 and Zigbee. DFRobot DFR0015
SparkFun XBee 3 is a set for wireless communication ideal to start using XBees. These modules enable data transfer from a remote sensor or data transfer from a computer to update the scoreboard or control the robot from the keyboard. Kit-15936
No product available!
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15435
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15454
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
XBee adapter with pads with holes for sewing the module to clothes and fabrics. SparkFun DEV-12921
Bluetooth 5.2 and IEEE 802.15.4 communication kit. It uses the STM32WB55RG microcontroller (1 MB Flash, 256 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0 +). STMicroelectronics NUCLEO-WB55RG
SparkFun XBee 3 is a set for wireless communication ideal to start using XBees. These modules enable data transfer from a remote sensor or data transfer from a computer to update the scoreboard or control the robot from the keyboard. Kit-15936