Adapter for Xbee (ZigBee) radio modules compatible with Teensy 3.1. It allows the direct connection of the XBee radio module series 1, 2 and the standard and Pro version with Teensy 3.1 or Teensy LC, extending the board's capabilities with wireless connectivity. The DIN and DOUT ports of the XBee module are connected via a DPDT switch that allows you to select the connection through the UART interface pins or any Teensy pins. On the board, the pins of both modules are led out to connectors with a 2.54 mm pitch. Full documentation with examples is available in the guide.

Attention!
The kit does not include Teensy female connectors and Teensy and Xbee modules.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Shield - Xbee w / o RF module
Base board for Xbee radio modules belonging to the Series 1, Series 2 and Pro families. Equipped with a voltage regulator, 3.3V to 5V level converters and LEDs for Power, RSSI and DIN / DOUT lines. SparkFun WRL-11373
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. SparkFun WRL-11812
Adapter for Xbee (ZigBee) radio modules compatible with Teensy 3.1. On the board, the pins of both modules are led out to connectors with a 2.54 mm pitch. SparkFun BOB-13311
No product available!
No product available!
WiFiBee-MT7681 is an XBee module based on the MT7681 Wi-Fi module. WiFiBee supports standard IEEE802.11b / g / ni protocols. Can be used as a remote programmer for Arduino tiles. It is powered by 3.3 V. DFRobot TEL0107
SparkFun XBee 3 is a set for wireless communication ideal to start using XBees. These modules enable data transfer from a remote sensor or data transfer from a computer to update the scoreboard or control the robot from the keyboard. Kit-15936
No product available!
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15435
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15454
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
XBee adapter with pads with holes for sewing the module to clothes and fabrics. SparkFun DEV-12921
Bluetooth 5.2 and IEEE 802.15.4 communication kit. It uses the STM32WB55RG microcontroller (1 MB Flash, 256 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0 +). STMicroelectronics NUCLEO-WB55RG
No product available!
An adapter dedicated to XBee modules. It has UART, USB interface and built-in buttons and LEDs. It provides an easy way for project development and debugging. Waveshare XBee USB Adapter
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 60 m, while in open space it reaches up to 1200 m. SparkFun WRL-22628
Adapter for Xbee (ZigBee) radio modules compatible with Teensy 3.1. On the board, the pins of both modules are led out to connectors with a 2.54 mm pitch. SparkFun BOB-13311