

zł421.95 tax excl.
A compact module designed for quick integration of IoT capabilities using a cellular network. It offers LTE-M and NB-IoT standards and a range of MicroPython programming resources, the intuitive XBee Studio tool and Digi Remote Manager, enabling remote software updates and monitoring. SparkFun WRL-22329
The Digi XBee 3 module is a modern, compact solution designed for quick integration of IoT capabilities using a cellular network. It is equipped with cellular and BLE connectivity and was created to enable the creation of secure wireless devices with global access and positioning capabilities. Combining the XBee ecosystem with cellular functionality creates a simple system for working with data via a cellular connection.
LTE-M and NB-IoT cellular standards are optimized for low energy consumption and transmitting small amounts of data, such as asset tracking or smart sensors (less than 5 MB of data per month). A global connection is instantly available with Digi XBee 3 global cellular. This module offers an excellent power saving mode, extending battery life and operating time. It does not come with a SIM card. To make IoT development easier, the XBee 3 suite includes a range of MicroPython development resources, the intuitive XBee Studio tool, and a 12-month Digi Remote Manager subscription for each module, enabling remote software updates and monitoring. Digi XBee Studio, a powerful tool designed to accelerate development, production and deployment, further facilitates IoT deployment in cellular networks.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Base board for prototyping IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT and Digi XBee RR modules. It gives access to the full functionality of the XBee module pins, including two USB Type-C connectors for UART communication and firmware updates, a Qwiic connector for I2C-compatible sensors and peripherals. SparkFun WRL-21636
No product available!
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15454
Bluetooth 5.2 and IEEE 802.15.4 communication kit. It uses the STM32WB55RG microcontroller (1 MB Flash, 256 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0 +). STMicroelectronics NUCLEO-WB55RG
No product available!
RF module providing wireless connectivity compliant with the IEEE 802.15.4 standard. It operates in the 2.4 GHz ISM band and allows local configuration via BLE with the Digi XBee mobile application. It is equipped with a Silicon Labs EFR32MG SoC transceiver chipset. The range in buildings is up to 60 m, while in open space it reaches up to 1200 m. SparkFun WRL-22626
No product available!
MRF24J40MA-I/RM is a compact IEEE 802.15.4 radio module for wireless communication in embedded applications. With a PCB antenna, low power consumption, and support for ZigBee and MiWi protocols, it provides stable data transmission over distances of up to 120 meters.
Base board for prototyping IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT and Digi XBee RR modules. It gives access to the full functionality of the XBee module pins, including two USB Type-C connectors for UART communication and firmware updates, a Qwiic connector for I2C-compatible sensors and peripherals. SparkFun WRL-21636
No product available!
WiFiBee-MT7681 is an XBee module based on the MT7681 Wi-Fi module. WiFiBee supports standard IEEE802.11b / g / ni protocols. Can be used as a remote programmer for Arduino tiles. It is powered by 3.3 V. DFRobot TEL0107
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. SparkFun WRL-11812
No product available!
Shield - Xbee w / o RF module
XBee adapter with pads with holes for sewing the module to clothes and fabrics. SparkFun DEV-12921
An adapter that allows you to connect modules in the XBee format to a computer via the USB Type-C interface. The adapter is based on the FT231XS system. SparkFun WRL-22043
Base board for Xbee radio modules belonging to the Series 1, Series 2 and Pro families. Equipped with a voltage regulator, 3.3V to 5V level converters and LEDs for Power, RSSI and DIN / DOUT lines. SparkFun WRL-11373
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 90 m, while in open space it reaches up to 3200 m. SparkFun WRL-22631
RF module providing wireless connectivity compliant with the IEEE 802.15.4 standard. It operates in the 2.4 GHz ISM band and allows local configuration via BLE with the Digi XBee mobile application. It is equipped with a Silicon Labs EFR32MG SoC transceiver chipset. The range in buildings is up to 90 m, while in open space it reaches up to 3200 m. SparkFun WRL-22627
No product available!
A compact module designed for quick integration of IoT capabilities using a cellular network. It offers LTE-M and NB-IoT standards and a range of MicroPython programming resources, the intuitive XBee Studio tool and Digi Remote Manager, enabling remote software updates and monitoring. SparkFun WRL-22329