+ 5V-Powered, Multichannel RS-232 Drivers / Receivers, SO28, maxim integrated, RoHS

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-1000-S

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm

Round, flexible, pressure sensor that can be used to implement very sensitive force detection. The sensor is durable and designed to detect static and dynamic pressure at high response speeds. DFRobot SEN0295

Female terminal block, 2-pin. Pitch 3.5mm. Height 7.8mm. Suitable for KF2EDGR male strips with a pitch of 3.5 mm. 2EDGKN-3.5. Set of 5 pieces

MY-GPS008C GPS Module, MYIR

The MQ-7 sensor allows you to measure the concentration of carbon monoxide (carbon monoxide). The measuring range of the sensor is in the range of 10 - 10,000 ppm

LoRa module based on Semtech SX1262 chip, supporting 868/915 MHz band and providing stable operation thanks to the use of TCXO. It is characterized by transmit power up to 22 dBm, receiver sensitivity -136.73 dBm and low power consumption, which makes it ideal for battery-powered IoT devices. Seeed Studio 114993390

Industrial switch USR-ISF1005 offers 5 Ethernet 10/100 Mbps ports, a wide power supply range, and resistance to harsh environmental conditions. Designed for use in automation systems, monitoring, transportation, and energy sectors, it ensures reliable connections in industrial networks.

Pink LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21

OLED display with a diagonal of 2.4" and a resolution of 128x64 pixels. Displays the content in white. Uses the SSD1309 driver and communicates via the SPI or I2C bus. Waveshare 2.42inch OLED Module

Finder 26.02.8.230.0000 is a pulse (bistable) relay equipped with two normally open (DPST-NO) contacts, with a 10 A load capacity and a maximum switching voltage of 400 V AC. Powered by a 230 V AC coil voltage, it is designed for mounting in an installation box, facilitating integration into building automation systems.

Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-1500-Y

7-inch HMI display module with touch panel dedicated to industrial applications. It offers a resolution of 1024x600 pixels. It is adapted to work in temperatures from -20℃ to 60℃, thanks to its solid housing and fanless design. Edatec ED-HMI3010-070C-0000

2 MPx camera with USB 2.0 interface. Equipped with an AR0230 CMOS sensor with a 95° viewing angle lens. ArduCAM B0438

Module with a knock-on sensor for measurement of methane, propane and carbon monoxide (MQ-9) concentrations. The module has an analogue output and an output triggered by exceeding the threshold of sensitivity.

Data logger with USB type C connector. Data is received via the UART interface and saved on the built-in Flash memory with a capacity of 128 MB. DFRobot TEL0147

Pololu 5658 is a breakout board for JST PH and SH 6-pin connectors, enabling integration with systems using a 2.54 mm pitch. With support for six channels and mounting holes, it is suitable for projects requiring stable multi-wire connections in prototypes and electronic devices.

Pin strip straight in black, single-row, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S. Set of 10 pieces