LCD 4x12, 65x43.5mm, LED backlight (RGB) FSTN, enhanced temperature range, RoHS

The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (10 mΩ), it supports currents up to 10 A continuous and 00 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5382

Module with DC motor driver DRV8874. It can work with motors supplied with the voltage from 4.5 to 37 V and current consumption up to 2.1 A. Pololu 4035

The module protects the load against reverse polarity to -60 V and blocks the flow of reverse current to the power supply. It uses the LM74700-Q1 ideal diode controller and a MOSFET transistor. Thanks to its low impedance (5 mΩ), it supports currents up to 12 A continuous and 40 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5383

Infrared Thermopile Sensor in Chip-Scale Package, WCSP8, TI, RoHS

IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939

32bit ARM Cortex-M0, 32K Flash, 8K RAM, LQFP48, RoHS

The 2-meter HDMI to VGA adapter by BLOW allows for the transmission of high-resolution video signals from a computer to an external display.

MicroSD and microSDHC memory card reader with USB 2.0 and microUSB interface. GoodRam AO20-MW01R11

LCD 1x16, 122x33mm, FSTN NEGATIVE, LED backlight (blue), enhanced temperature range, RoHS

TSX561ILT, Micropower, wide bandwidth (900 kHz), 16 V CMOS operational amplifiers, SOT-23-5

JACK plug 3.5, stereo, metal.

3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi, 320×480 resolution. Waveshare 3.5inch RPi LCD (A)

A set with a measuring module and a probe for measuring the pH of the solution. It is supplied with the voltage of 3.3 to 5.5 V. It has an analog Gravity output interface. DFRobot SEN0161-V2

Touch keyboard module with 16 buttons based on the TTP229 chip. It is equipped with a connector with derived signals and a power supply diode

Module with OLED 0.49" display with a resolution of 64x32 pixels with the content displayed in white. It communicates via the I2C interface. ModOLEDdisp0.49"

The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240

Cable with plug and socket USB 2.0 type. A, cable length 0.5 m. Equipped with a switch