7.9" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 400x1280 pixels. Waveshare 7.9inch HDMI LCD

Display connector E-paper GDE035A3, for surface solder, 24 pins

Module with digital barometer ICP-10111. The system enables pressure measurement in the range from 300 to 1100 hPa with an accuracy of 1 Pa. DFRobot SEN0516

Module with digital barometer ICP-10111. The system enables pressure measurement in the range from 300 to 1100 hPa with an accuracy of 1 Pa. DFRobot SEN0517

Camera lens with an M12 mount and a 4mm focal length featuring reduced geometric distortion, intended for camera modules with 1/2.5" sensors. ArduCam LN011 M2504ZH05S

Camera lens with an M12 mount and a 1.56mm focal length, intended for camera modules that require a very wide field of view. ArduCam LN008 M25156H14

Step-Up/Step-Down converter module based on the S13V10F5 system. It has an input voltage from 2.8 to 22 V and an output voltage of 5 V. The current efficiency of the converter is up to 1 A. Pololu 4083

Universal prototyping board for Raspberry Pi minicomputers. Comes with a 40-pin connector. Adafruit 3203

Grove module with temperature, humidity and pressure sensor. The board is equipped with a Grove connector and communicates via I2C or SPI. Seeed Studio 101020193

Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005

The Akyga AK-ND-C14 USB-C adapter allows you to use USB-C PD chargers in older Sony Vaio laptops with a 6.5x4.4 mm connector. It works with Power Delivery technology, automatically adjusting the supply voltage. It is easy to use and allows you to adapt your devices to USB-C standards. Before use, make sure the power supply has the appropriate power. Akyga AK-ND-C14

Module with a digital temperature and humidity sensor based on the SHT31-F system. Communication via the I2C interface. DFRobot SEN0332

Module with the OPTIGA TRUST M SLS32AIA cryptographic chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4351

8-bit ST7 MCU, 4kB Flash, 256B RAM, Lite Timer with Watchdog, Autoreload Timer with 32-MHz input clock, SPI, 10-bit ADC with Op-Amp, SOP20, RoHS

LCD TFT 1.3" display with a resolution of 240x240 pixels. Equipped with an SPI interface and two user buttons. Adafruit 4484

ThinkNode M3 tracker based on the Meshtastic protocol, equipped with GPS, WiFi, BLE and LoRa 868MHz, designed for indoor and outdoor positioning with Meshtastic app support. Elecrow ThinkNode M3 Tracker Card

Module with a logarithmic digital potentiometer based on the DS1841 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4570

4" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and SPI for touch screen. Resolution 800x480 pixels. Waveshare 4inch HDMI LCD (H)

Camera lens with an M12 mount and a 3.6mm focal length featuring reduced geometric distortion, intended for camera modules with 1/2.5" sensors. ArduCam LN012 M25360H06S

Lanberg Cat.5e 30m patch cord provides a stable and fast connection, ideal for a variety of network applications. Lanberg PCU5-10CC-3000-R