ThinkNode M3 - Meshtastic MeshCore tracker GPS WiFi BLE 868MHz

Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633

A mobile LoRa transceiver compatible with Meshtastic and MeshCore, equipped with GPS supporting GPS, GLONASS, BeiDou, and QZSS. The device utilizes a powerful ESP32-S3 microcontroller and SX1262 transceiver, ensuring stable, long-range communication in the 868 MHz band. The 1.54" EPD screen allows for convenient data display with very low power consumption, and the 1200 mAh battery ensures long operation in the field. Elecrow ThinkNode M5 Walkie-Talkie

A LoRa transceiver with an nRF52840 processor and an SX1262 radio, offering stable field communication and full Meshtastic and MeshCore compatibility. The device is equipped with a GPS module supporting GPS, GLONASS, BeiDou, and QZSS, and a clear 1.54" EPD display, ideal for operation in direct sunlight. A 1200 mAh battery provides over 48 hours of operation, and an external RP-SMA antenna allows for greater range and better signal quality. Elecrow ThinkNode M1 Walkie-Talkie

A compact ESP32-S3-based LoRa transceiver offering stable field communication without the need for a cellular network. The device comes pre-installed with Meshtastic, a 1.3" OLED display, and an SX1262 transceiver supporting the EU868 MHz band. A built-in 1000 mAh battery ensures long battery life, while Bluetooth and USB-C support simplify setup and everyday use. The Elecrow ThinkNode M2 ​​Walkie-Talkie Mini

An ESP32-S3 HMI display with a dual-core 240 MHz Xtensa LX7 processor, offering fast performance and extensive wireless connectivity via Wi-Fi and Bluetooth 5.0. The 3.5-inch IPS screen with a resolution of 480x320 provides excellent image quality and precise capacitive touch. The device supports AI features such as speech recognition and synthesis, as well as RTC, battery charging, audio, and an SD card slot. Compatibility with the Arduino IDE, ESP-IDF, and LVGL enables the rapid development of modern IoT interfaces and applications. Elecrow CrowPanel Advance 3.5"

Charging accessory for the Card Tracker T1000-E in the form of a PCBA board with six magnetic cables, designed for simultaneous charging of multiple devices. Seeed Studio 114993534

ThinkNode M3 tracker based on the Meshtastic protocol, equipped with GPS, WiFi, BLE and LoRa 868MHz, designed for indoor and outdoor positioning with Meshtastic app support. Elecrow ThinkNode M3 Tracker Card

ThinkNode M6 Outdoor Solar Power is an outdoor IoT node for Meshtastic and MeshCore networks, based on the nRF52840, supporting GPS and LoRa 868 MHz. The device features a 6 W solar power system with MPPT, an integrated battery, and Bluetooth connectivity, enabling long-term autonomous operation in harsh outdoor conditions. An ideal solution for mesh communication, environmental monitoring, and off-grid applications. Elecrow LMM14106D

A multi-functional device combining a 7000 mAh power bank with LoRa communication based on the Meshtastic protocol, enabling the creation of a decentralized mesh network without internet access. Equipped with a Semtech LR1110 module, an nRF52840 microcontroller, and built-in GPS supporting multiple navigation systems, it allows for messaging and real-time location sharing. It offers fast charging up to 22.5W, PD, QC, and PPS support, and MagSafe-compatible wireless charging. Elecrow LMM14004D1

The ThinkNode M7 gateway is designed for building stationary Meshtastic network nodes with LoRa communication in the EU868. The ESP32-S3 and LR1110 provide LoRa, 2.4 GHz WiFi and Bluetooth 5.0 connectivity. A 10/100 Mbps Ethernet port with IEEE 802.3af PoE enables wired communication and power delivery over a single cable, while the USB Type-C port provides a 5 V power supply. The pre-installed gateway functionality simplifies deployment in communication networks. Elecrow ThinkNode M7 Meshtastic

ThinkNode M2 Meshtastic (LoRa) enables long-range communication using LoRa technology and Meshtastic firmware. The device is equipped with an ESP32-S3 microcontroller, an SX1262 LoRa module, a 1.3-inch OLED display with 128 × 64 px resolution, 2.4 GHz WiFi, Bluetooth 5.0 Low Energy, and a USB Type-C connector. The transceiver is compatible with the Meshtastic App, also supports MeshCore firmware, and is suitable for emergency communications, mesh networking, and IoT applications. Elecrow ThinkNode M2 Meshtastic (LoRa)

Compact communication platform based on a dual-core ESP32-S3 processor, designed for building LoRa Mesh networks, IoT projects, and embedded systems. The device features a 1.14" LCD display, a 56-key keyboard, and advanced audio capabilities with a microphone, speaker, and 3.5 mm audio output. The design is fully based on the Cardputer-Adv platform and extends its functionality with the Cap LoRa-1262 module, adding LoRa communication and GNSS positioning with support for GPS, BeiDou, Galileo, and GLONASS. A built-in accelerometer, infrared transmitter, microSD card slot, and Grove interfaces allow easy expansion and sensor integration, while the 1750 mAh Li-ion battery provides mobility and extended operating time. M5Stack K152

Portable LoRa device based on the nRF52840 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 1.54" E-Paper display, an L76K GNSS positioning module, and a BME280 environmental sensor in a compact ABS enclosure with a built-in 850 mAh battery. Factory-installed Meshtastic firmware allows immediate deployment in mesh networks without manually flashing the software. The kit includes an 868 MHz LoRa antenna and a USB Type-C cable. The device is designed for autonomous mesh nodes, long-range communication, GPS positioning, and mobile IoT applications. LILYGO TTGO T-Echo 868 MHz BME280 Meshtastic Firmware

An ESP32-based development board that combines a LoRa communication module, NEO-6M GPS receiver, and a 0.96" OLED display in a single device. Preloaded with Meshtastic firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a non-soldered 0.96" OLED display, a 433 MHz LoRa antenna, and pin headers for self-assembly. The board is suitable for building autonomous mesh network nodes, GPS trackers, and battery-powered IoT devices using a 18650 Li-Ion cell or a microUSB power supply. LILYGO TTGO T-Beam Meshtastic 433 MHz Non-Soldered OLED

Open-source LoRa USB adapter based on the CH341A and Semtech SX1262 chips, designed to turn Linux or macOS devices into Meshtastic network nodes. Supports EU868 and US915 bands, an external SMA antenna and Web UI management. Powered directly from the USB port with no additional power supply required. Elecrow LMM15202D

Portable communication terminal for Meshtastic networks, equipped with an ESP32-S3, Semtech LR1110 LoRa transceiver, 2.4" color LCD and physical QWERTY keyboard. It supports the EU868 band, 2.4 GHz WiFi, Bluetooth 5.0 and GNSS positioning using GPS, BeiDou, Galileo and GLONASS. A built-in 2300 mAh Li-Po battery, 16 GB of storage and preinstalled Meshtastic firmware allow standalone operation without a smartphone. Elecrow ThinkNode M9 Meshtastic EU868