zł208.13 tax excl.
The ThinkNode M7 gateway is designed for building stationary Meshtastic network nodes with LoRa communication in the EU868. The ESP32-S3 and LR1110 provide LoRa, 2.4 GHz WiFi and Bluetooth 5.0 connectivity. A 10/100 Mbps Ethernet port with IEEE 802.3af PoE enables wired communication and power delivery over a single cable, while the USB Type-C port provides a 5 V power supply. The pre-installed gateway functionality simplifies deployment in communication networks. Elecrow ThinkNode M7 Meshtastic
The Elecrow ThinkNode M7 is designed to operate as a stationary communication gateway in Meshtastic networks. The design combines an ESP32-S3 microcontroller with a dual-core 32-bit Xtensa LX7 processor running at up to 240 MHz and an LR1110 radio chip responsible for LoRa communication. Available EU868 band. The ESP32-S3 also provides 2.4 GHz WiFi and Bluetooth Low Energy / Bluetooth 5.0 connectivity, allowing the gateway to communicate with local devices and the Meshtastic application. Memory includes 512 kB SRAM, 8 MB PSRAM, 4 MB Flash and 384 kB ROM. The manufacturer specifies a maximum LoRa communication range of 8–10 km, although the actual range depends on the antennas, terrain, buildings and radio propagation conditions.
The ThinkNode M7 hardware and software have been optimized for Meshtastic, while the pre-installed gateway functionality reduces the amount of configuration required during initial setup. Device parameters can be configured using the official Meshtastic application. The hardware also supports flashing MeshCore firmware.
LoRa communication is handled by the LR1110 radio chip connected to an external antenna via a female RP-SMA connector. A separate WLAN/BT antenna supports WiFi and Bluetooth connectivity. Separate antenna paths allow LoRa communication and local wireless interfaces to be used in installations requiring access to both Meshtastic networks and IP infrastructure.


The 10/100 Mbps RJ45 port provides a wired Ethernet connection. The gateway also supports IEEE 802.3af PoE with an input voltage range from 37 V to 57 V DC, allowing network data and power to be delivered through a single Ethernet cable. PoE operation requires a compatible IEEE 802.3af power source or adapter.
Alternatively, the gateway can be powered through the USB Type-C port at 5 V / 1 A, which is also used for communication and debugging. Ethernet connectivity combined with PoE allows the gateway to be installed in a location providing suitable LoRa signal propagation without the need for a separate power cable.
The ThinkNode M7 Meshtastic enclosure measures 74 × 74 × 33 mm without antennas and is made of plastic. The gateway can be placed on a desk or mounted on a wall using the rear mounting base. Its compact construction simplifies installation in the selected location.
PWR, BT/LoRa and LINK LED indicators provide information about basic operating states and communication activity. The Reload button is used to restart the device, configure it and restore factory settings, while the hidden Boot button enables programming mode. The gateway operates at temperatures from -20°C to +70°C, at a relative humidity of 10% to 95% without condensation, and has a net weight of 80 g.

ThinkNode M7 can be used as part of communication infrastructure in smart buildings, facility management systems, agricultural and livestock installations, emergency communication systems and temporary networks deployed during events or field operations. The gateway can also extend indoor LoRa network coverage and provide a stationary access point for Meshtastic networks.
Manufacturer
Responsible person
LILYGO T3 LoRa32 V1.6.1 development board in the Paxcounter 868MHz (Q168) variant, featuring an ESP32 microcontroller, 4 MB Flash memory, SX1276 LoRa transceiver and 0.96" OLED display with 128 x 64 px resolution. Supports WiFi, Bluetooth 4.2 and BLE, and includes a microSD card slot, CH9102 USB-UART converter and 3.7 V Li-Po battery connector. LILYGO Paxcounter 868MHz [Q168]
No product available!
A low-power development platform designed for creating LoRa-based tracking devices. It combines the Nordic nRF52840 chip with the Semtech LR1110 module, offering wide range, low power consumption, and compatibility with Meshtastic software. The board supports over 300 Seeed Grove sensors and has built-in environmental sensors and an accelerometer for expanded monitoring capabilities. Seeed Studio 114993370
A compact IoT device that combines an ESP32S3 processor with a Wio-SX1262 LoRa module, enabling communication distances of up to 5 km in the 868–915 MHz band. With support for LoRaWAN, 2.4 GHz Wi-Fi, Bluetooth 5.0, and expansion options for GNSS and sensors, it is a versatile solution for IoT gateways and nodes. Seeed Studio 102010611
A compact Meshtastic compatible device that combines LR1110, nRF52840 and Mediatek AG3335 GPS technologies for precise positioning and low power consumption. With IP65 waterproofing, Bluetooth 5.0, Thread, and Zigbee support, magnetic charging, and support for both Meshtastic and MeshCore protocols, it\'s ideal for outdoor activities and emergency situations. Seeed Studio 114993369
A compact IoT device that combines an ESP32S3 processor with a Wio-SX1262 LoRa module, enabling communication distances of up to 5 km in the 868–915 MHz band. With support for LoRaWAN, 2.4 GHz Wi-Fi, Bluetooth 5.0, and expansion options for GNSS and sensors, it is a versatile solution for IoT gateways and nodes. Seeed Studio 113110064
Advanced ESP32-based communication module with Wi-Fi and Bluetooth 4.2 support, equipped with LoRa SX1276 chip for long-range transmission in the 868 MHz band. Integrated NEO-6M GPS module and 0.96" OLED display enable real-time location and data viewing, and built-in 18650 cell cage provides mobility and energy independence. T-Beam V1.2 is ideal for projects based on mesh networks, providing reliable connectivity in field and IoT applications. LILYGO TTGO Meshtastic T-Beam V1.2
No product available!
Compact and energy-efficient Meshtastic, MeshCore node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, power supply from USB-C, solar panel or battery (built-in 2000mAh battery), and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993649
No product available!
Solar-powered communication node integrating LoRa modules and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel, which makes it ideal for field work. Thanks to its long range (up to 8-9 km) and the possibility of expansion via Grove interface, P1 will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993643
Compact and energy-efficient solution combining Bluetooth 5.0 and LoRa (862–930 MHz), ideal for IoT projects requiring long range and low power consumption. It uses the XIAO nRF52840 MCU with Cortex-M4 core and support for multiple interfaces and the LoRa SX1262 module for reliable wireless communication. The kit is perfect for applications such as Meshtastic, asset tracking, sensor networks or educational projects. Seeed Studio 102010710
A comprehensive development kit for creating mobile and energy-efficient LoRa® devices with GPS support and environmental sensors. The kit includes a development board with nRF52840 and Semtech LR1110, an Air530 GPS module and a 0.96” OLED display, ready to work with Meshtastic software. With support for Bluetooth 5.3, Zigbee, Thread and four Grove connectors, the kit offers extensive expansion possibilities and full freedom to design independent communication and location systems. Seeed Studio E24070201
No product available!
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, powered by USB-C, solar panel or battery. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it proves to be a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993653
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers a ready-to-use, no-programming, power supply from USB-C, solar panel or battery, and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993648
Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633
A mobile LoRa transceiver compatible with Meshtastic and MeshCore, equipped with GPS supporting GPS, GLONASS, BeiDou, and QZSS. The device utilizes a powerful ESP32-S3 microcontroller and SX1262 transceiver, ensuring stable, long-range communication in the 868 MHz band. The 1.54" EPD screen allows for convenient data display with very low power consumption, and the 1200 mAh battery ensures long operation in the field. Elecrow ThinkNode M5 Walkie-Talkie
A LoRa transceiver with an nRF52840 processor and an SX1262 radio, offering stable field communication and full Meshtastic and MeshCore compatibility. The device is equipped with a GPS module supporting GPS, GLONASS, BeiDou, and QZSS, and a clear 1.54" EPD display, ideal for operation in direct sunlight. A 1200 mAh battery provides over 48 hours of operation, and an external RP-SMA antenna allows for greater range and better signal quality. Elecrow ThinkNode M1 Walkie-Talkie
A compact ESP32-S3-based LoRa transceiver offering stable field communication without the need for a cellular network. The device comes pre-installed with Meshtastic, a 1.3" OLED display, and an SX1262 transceiver supporting the EU868 MHz band. A built-in 1000 mAh battery ensures long battery life, while Bluetooth and USB-C support simplify setup and everyday use. The Elecrow ThinkNode M2 Walkie-Talkie Mini
The ThinkNode M7 gateway is designed for building stationary Meshtastic network nodes with LoRa communication in the EU868. The ESP32-S3 and LR1110 provide LoRa, 2.4 GHz WiFi and Bluetooth 5.0 connectivity. A 10/100 Mbps Ethernet port with IEEE 802.3af PoE enables wired communication and power delivery over a single cable, while the USB Type-C port provides a 5 V power supply. The pre-installed gateway functionality simplifies deployment in communication networks. Elecrow ThinkNode M7 Meshtastic