Category: ELECTRONICS

The ring has sixteen RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from 4-7V, only one signal line is required to control it. NeoPixel Ring 16 x WS2812

Universal test leads for Uni-T multimeters. The kit includes two test leads. Uni-T UT-L27

I2C multiplexer module with TCA9548A system. Allows you to connect up to 8 devices. The system works like a gateway - it transmits I2C interface data to one of the 8 main busses. This allows you to connect up to 8 devices with the same address. Adafruit 2717

Module with MEMS microphone; model SPW2430 with built-in amplifier. The plate also has a 3.3 V voltage stabilizer needed to power the microphone. Adafruit 2716

N-channel 100 V 8.5 mΩ standard level MOSFET in TO220, TO-220, NXP, RoHS

HAT GSM / GPRS extension module for Raspberry Pi computers in versions 2 and +. The module is based on the SIM800 quad band SIM800. The set includes an antenna

Module with Hall sensor, allows for magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Gravity standard. DFRobot SEN0185

16 MHz chord resonator in a housing with dimensions of 5.0 x 3.2 mm, with two pins.

Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface

Inspection camera with a flexible probe, 1m long. It allows you to observe the interior of the devices from different angles through a small inspection opening without the need to disassemble them. Uni-T UT665

The FM tuner module with the Si4703 chip allows you to build an FM radio with RDS support. It uses the I2C bus for communication. WRL-12938

The module contains eight 5V relays with a maximum current of 10A (250 VAC) and opto-isolated inputs, and with jumpers it is possible to select high or low switching. The module is equipped with screw connectors. modRL08_ISO

LED 0805 red, RoHS

Evaluation board with built-in AD8232 heart monitor module and components placed in a way allowing effective implementation of medical and fitness applications, configuration of 2 or 3 electrodes

ATTINY44A-PU

ATtiny44A-PU is a microcontroller from the AVR family in the DIP14 housing, it is equipped with memory: 2 kB Flash, 128 B SRAM, 128 B EEPROM. The power supply voltage is 4.5..5.5 V, the maximum clock speed is 20 MHz.

Module with trackball and RGB backlight. It has a built-in button and is perfect for building your own mouse, for example. Pimoroni PIM447

The Microchip system in the DIP8 housing, a dual driver, allows the MOSFET transistors to be controlled with a high switching speed. The controller is characterized by low power consumption, high current efficiency when loading eg gate capacity, or ESD resistance up to 4kV

Ultrasonic distance sensor with a range of up to 15m. Powered with the voltage from 9 to 24 V, it communicates via the RS485 interface. DFRobot SEN0310

This is the Wheel Encoder Kit from DAGU, a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. ROB-12629