Order and pay in
for same day shipping
Adapter board from SODIMM200-1.8V to 2.54mm connectors.
Development board with ESP32 module (WiFi + Bluetooth). Equipped with a...
Development board with ESP32 module (WiFi + Bluetooth) in the set with...
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was...
Development board with Bluetooth 5.2 BGM220P module from Silicon Labs....
A set of two cameras with a Sony IMX219 sensor, allows you to rotate the...
Adapter DSI 22-pin to 15-pin. It allows you to connect displays with a...
HDMI to CSI adapter for Raspberry Pi minicomputers. Supports image...
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122
A small motor with a plastic gear 120:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1125
A small motor with a plastic gear 120:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1124
A small motor with a plastic 120:1 gear, the output shaft at an angle of 90°, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1123
120:1 Plastic Gearmotor Offset OutputPlastic gear motor 120:1, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and maximum torque of 5.4 kg*cm. Pololu 1119
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and a maximum torque of 5.4 kg*cm. Pololu 1121
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
Tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 136:1 plastic planetary gearbox. 500 RPM and 45 mA free-run, 8 oz-in (0.6 kg-cm) and 400 mA stall. Pololu 2358
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 51 RPM and a maximum torque of 7.2 kg*cm. Pololu 1120
Motor with plastic gear 228:1, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 45 RPM and a maximum torque of 7.2 kg*cm. Pololu 1118
DC motor equipped with a gear ratio 120: 1, powered by 6V with a torque of 0.8 kg * cm (0.08 Nm). The current consumed by the unloaded motor is about 170mA, while the maximum current drawn under load is 2.8A. It has an integrated quadrature encoder. DFRobot FIT0450
DAGU gearmotors; 4.5V with a no load current of 190mA while possessing a gearbox ratio of 48:1 and a wheel speed of 140 RPM unloaded. axis. ROB-13302
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.