Category: LPC (NXP)

10-wire ribbon cable (1.27mm to 2.54mm) for Segger J-Link EDU mini

Debugger/programmer with a USB interface that supports the SWD (Serial Wire Debbug) programming interface. It is based on CMSIS-DAP (Coresight Debug Access Port) and also has a USB-UART converter function

JTAG interface for microcontrollers with ARM core

J-LINK EDU Mini is a version of the J-Link EDU (8.08.90) in a reduced form factor with identical functionality for Cortex-M based targets. It has been designed to allow students and educational facilities as well as hobbyists access to top of the line debug probe technology. Version for non-commercial use only. J-Link EDU mini

JTAG/SWD Emulator with USB interface

JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger

Hi-Speed JTAG/SWD Emulator for ARM7/9, Cortex and Renesas RX cores with USB interface, Segger

LPCXpresso55S28 evaluation kit with LPC55S28 microcontroller with ARM Cortex-M33 core. The board contains a built-in LPC-Link2 programmer, audio subsystem, accelerometer, microSD slot, USB interfaces and expansion connectors. NXP LPC55S28-EVK

J-Link BASE is a USB powered debug probe supporting a large number of CPU cores. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-link BASE Compact (8.19.00)

Hi-Speed JTAG/SWD Emulator with USB and Ethernet interface, Segger

MYD-LPC1850 Development Board

Starter board LPCXpresso18S37 with LPC18S37 microcontroller (Cortex-M3). The set is equipped with a built-in programmer, buttons, diode, SPI Flash quad flash and USB - UART konwetrer

Xplorer ++ Baseboard - development kit

LPCXpresso55S69 evaluation kit with LPC55S69 microcontroller with ARM Cortex-M33 core. The board contains a built-in debugging probe, audio subsystem and accelerometer, with the possibility of adding ready-made additional boards for connecting to the network, sensors, displays and other interfaces. NXP LPC55S69-EVK

LPCXpresso55S16 evaluation kit with LPC55S16 microcontroller with ARM Cortex-M33 core. The board contains built-in LPC-Link2, audio subsystem, accelerometer, USB interfaces and Arduino connectors. NXP LPC55S16-EVK

JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production (flash programming) purposes. J-link PLUS Compact (8.19.28)

JTAG / SWD programmer-debugger with USB and WiFi interface. It supports microcontrollers and microprocessors with Cortex-M, Cortex-A, Cortex-R and ARM7, ARM9 and ARM11 cores of most manufacturers as well as 8051, RISC-V, PIC32, RX. Segger J-Link WiFi (8.14.28)

Starter set LPCXpresso802 with LPC802 microcontroller (Cortex-M0). The set is equipped with a built-in programmer, buttons, diode and SPI Flash memory. NXP OM40000

ARM ULINKpro-D Debug and Trace Unit