

Solarbotics GM10 81:1 Geared Pager Motor
The Solarbotics GM10 81:1 Geared Pager Motor is the smallest gearbox and brushed DC motor combination we carry. The 5-gram unit delivers 3.6 oz-in of torque and 370 RPM at 5 V.
The GM10 is a very small brushed DC motor and gearbox combination. At 5 volts, the motor draws 27 mA, and the 81:1 gear ratio delivers 370 RPM. This gearmotor provides 3.6 oz-in of torque with a stall current of 184 mA. All of this is in a tiny package with a weight of only 5 grams! This motor has 12" stranded wire leads.
This motor does not have continuous rotation by default, but you can easily remove the centering spring that limits motion to approximately 60 degrees in each direction. Removing the included arm exposes a 0.190" round shaft that is 0.125" long; the last 0.050" of the shaft is a square with 0.140" sides. The GM10 1" wheels are designed specifically for use with this motor once it has been modified for continuous rotation.
If you’ve been looking for the right motor and gearbox for your next micro-sized robot project, this motor is for you! We also carry a variety of larger gearmotors, which are listed on our gearbox page.
Note: The GM10 81:1 geared pager motor does not come with mounting hardware, instructions, or packaging.
![]() |
Solarbotics GM10 geared pager motor dimensions (in mm). |
---|
You can download a pdf version of this drawing here (48k pdf).
![]() |
Solarbotics GM7 120:1 Mini Gear Motor 90 deg. Output |
![]() |
Solarbotics GM3 224:1 Gear Motor 90 deg. Output |
![]() |
Solarbotics GM6 120:1 Mini Gear Motor Offset Output |
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Solarbotics GM2 224:1 Gear Motor Offset Output
This compact, inexpensive plastic gearmotor (brushed DC motor with a 120:1 reduction gearbox) is well suited for use in small robots. While intended for operation at 4.5 V, it should run comfortably in the 3 V to 6 V range.
DC motor with plastic gear 1:48. Equipped with an incremental encoder with Hall sensors.
DAGU gearmotors; 4.5V with a no load current of 190mA while possessing a gearbox ratio of 48:1 and a wheel speed of 140 RPM unloaded. axis. ROB-13302
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122
Solarbotics GM8 143:1 Gear Motor Offset Output
Tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 136:1 plastic planetary gearbox. 500 RPM and 45 mA free-run, 8 oz-in (0.6 kg-cm) and 400 mA stall. Pololu 2358
No product available!
Solarbotics GM3 224:1 Gear Motor 90 deg. Output
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and a maximum torque of 5.4 kg*cm. Pololu 1121
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
DC motor equipped with a gear ratio 120: 1, powered by 6V with a torque of 0.8 kg * cm (0.08 Nm). The current consumed by the unloaded motor is about 170mA, while the maximum current drawn under load is 2.8A. It has an integrated quadrature encoder. DFRobot FIT0450
DC motor with a two-sided shaft with built-in 48: 1 gearbox.
DC motor equipped with a plastic gear 48:1 with a cut shaft on both sides and an additional shaft for connecting an encoder
No product available!
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 700:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.3 g (0.046 oz), making it a great actuator for miniature robots and very small mechanisms.
DC motor with 1:48 plastic gearbox. equipped with incremental encoder with Hall sensors. Includes bracket, mounting hardware and cord
No product available!
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
Solarbotics GM10 81:1 Geared Pager Motor