120:1 4,5V - mini plastic gear motor
ID: 195516
5906623477036
zł24.48
Tax included
zł19.90 tax excl.
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122
Description
A small motor with a plastic gear 120:1 and an offset shaft with a diameter of 2 mm. The recommended operating voltage of the motor is 4.5 V and at this voltage it reaches a speed of 120 RPM and a maximum torque of 1.4 kg*cm, consuming a current from 0.08 A to 0.8 A. The motor uses a shaft with grooves compatible with adapters for LEGO wheels.
Suitable mounting brackets in low and high versions are available for the motors.
Our offer includes a number of controllers that perfectly cooperate with the presented engines.
 |
 |
 |
Features
- Motor type: mini with plastic gear
- Gear: 120:1
- Supply voltage: 3 to 6 V (typical 4.5 V)
- Speed: 120 RPM
- Maximum torque: 1.4 kg*cm
- Minimum current consumption: 0.08 A
- Maximum current consumption: 0.8 A
- Shaft diameter: 2 mm
- Dimensions: 36.5 x 20 x 27.4 m
- Weight: 19 g
195516
Data sheet
- DC motor power
- Other
- Gear material
- Plastic
- Gear ratio
- 120:1
- Rotation speed
- 120RPM
- Shaft diameter
- 2 mm
- Shaft shape
- Round
- Obustronny wał silnika
- Nie
- Power supply voltage
- 4.5V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pololu Low-Voltage Dual Serial Motor Controller
zł158.61
24h
Available quantity: 1
Available
Compact and complete robot controller, containing the ATmega328P AVR microcontroller (with 32 KB of Flash memory and 2 KB of RAM memory) and a two-channel DC motor driver. Pololu 1220
zł92.57
24h
Available quantity: 1
Available
DRV8835 Dual Motor Driver Carrier
zł23.90
24h
Available quantity: 10
Available
These tall brackets offer an easy and convenient mounting solution for mini plastic gearmotors.
zł26.60
24h
Available quantity: 2
Available
These wide brackets offer an easy and convenient mounting solution for mini plastic gearmotors. The white plastic bracket clasps securely around the gearmotor, and the mounting tabs capture the nuts for easy installation. These brackets are sold in pairs, and each bracket comes with two M3 screws, two nuts, and a spacer.
zł26.60
24h
Available quantity: 4
Available
Other products in the same category (16)
High-power brushed DC motor, 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is offset from but parallel to the motor shaft, built-in safety clutch. Pololu 1512
zł24.53
24h
Available quantity: 1
Available
Solarbotics GM3 224:1 Gear Motor 90 deg. Output
zł28.87
24h
Available quantity: 2
Available
Tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 136:1 plastic planetary gearbox. 500 RPM and 45 mA free-run, 8 oz-in (0.6 kg-cm) and 400 mA stall. Pololu 2358
zł74.11
4 weeks
No product available!
Solarbotics GM6 120:1 Mini Gear Motor Offset Output
zł37.33
24h
Available quantity: 1
Available
DC motor with a two-sided shaft with built-in 48: 1 gearbox.
zł11.32
24h
Available quantity: 15
Available
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 700:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.3 g (0.046 oz), making it a great actuator for miniature robots and very small mechanisms.
zł75.39
24h
Available quantity: 5
Available
DC motor equipped with a metal gear 1:90 with a cut shaft on both sides
zł14.16
24h
Available quantity: 9
Available
Solarbotics GM8 143:1 Gear Motor Offset Output
zł81.73
24h
Available quantity: 3
Available
DC motor equipped with a gear ratio 120: 1, powered by 6V with a torque of 0.8 kg * cm (0.08 Nm). The current consumed by the unloaded motor is about 170mA, while the maximum current drawn under load is 2.8A. It has an integrated quadrature encoder. DFRobot FIT0450
zł33.06
24h
Available quantity: 10
Available
DC motor with 1:48 plastic gearbox. equipped with incremental encoder with Hall sensors. Includes bracket, mounting hardware and cord
zł46.14
4 weeks
No product available!
DC motor with plastic gear 1:48. Equipped with an incremental encoder with Hall sensors.
zł44.18
24h
Available quantity: 2
Available
High-power brushed DC motor with a 120:1 reduction gearbox, intended for operation at 4.5 V, 9.7mm-long gearbox, 3 mm-diameter D-shaped output shaft that is perpendicular to the motor shaft, and a built-in safety clutch. Pololu 1511
zł24.53
24h
Available quantity: 1
Available
DC motor equipped with a plastic gear 48:1 with a cut shaft on both sides and an additional shaft for connecting an encoder
zł5.14
4 weeks
No product available!
A small motor with a plastic 120:1 gear, the output shaft at an angle of 90°, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1123
zł43.12
24h
Available quantity: 6
Available
Solarbotics GM9 143:1 Gear Motor 90 deg. Output
zł31.34
24h
Available quantity: 1
Available
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 26:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.2 g (0.042 oz), making it a great actuator for miniature robots and very small mechanisms.
Key specs at 6 V: 2500 RPM and 35 mA free-run, 1.5 oz-in (0.1 kg-cm) and 400 mA stall.
zł78.47
4 weeks
No product available!
A small motor with a plastic gear 120:1, operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and a maximum torque of 1.4 kg*cm. Pololu 1122