Antenna with SMA male plug operating in the 2.4 GHz frequency band. It has a gain of 7 dBi and a cable. Magnetically attached

This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. SEN-13332

This compact board breaks out the pins of a microSD card connector necessary to interface with the card through SPI (Serial Peripheral Interface), and it can be directly integrated into 5 V systems thanks to its on board 3.3 V regulator and level shifting circuity. Pololu 2587

Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573

Mechanical mini keyboard with 16 buttons and backlight. Based on the RP2040 chip, it uses Kailh Speed Gold buttons. Pimoroni PIM565

The UBIQUITI UniFi Switch Flex Mini is a five-port Gigabit Ethernet switch powered via PoE or USB-C, designed for installations in UniFi systems that require simple and reliable LAN network expansion. With support for Jumbo frames, Full Duplex transmission, and compact dimensions, it is suitable for office, industrial, and home environments.

7-port USB hub enables simultaneous connection of multiple peripheral devices while ensuring high compatibility and surge protection. Suitable for both home and office environments.

Air quality sensor module based on the SGP40 system. It communicates via the I2C interface. DFRobot SEN0392

Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 800x480 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM370

Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 720x720 px, dedicated to the Raspberry Pi. Equipped with a capacitive touch screen, communicates via the DSI interface. Pimoroni PIM470

OS Preinstalled Flash Memory with Android

Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 720x720 px, dedicated to the Raspberry Pi. It communicates via the DSI interface. Pimoroni PIM475

OS Preinstalled Flash Memory with Android

IPS 5.5" LCD display with touch panel dedicated for Raspberry Pi minicomputers. Equipped with HDMI interface for image display and USB for touch panel. It has a resolution of 1440x2560 pixels. Waveshare 5.5inch 1440x2560 LCD (with case A)

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 15 V or 20 V and testing chargers. PDC005

OLED display with a diagonal of 1.3" and a resolution of 128x64 pixels. Designed for use with Feather series plates. Adafruit 4650

Module with BDS/GNSS AT6558 receiver. It can receive data from six location systems simultaneously: GPS, GLONASS, Galileo, QZSS, SBAS and BeiDou. It communicates via the UART interface. DFRobot TEL0132

Waterproof NeoPixel tape with RGB LED diodes, 1m long, 60 LEDs per meter, diodes are mounted on a flexible black PCB. Adafruit 1376

Shielded FTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCF5-10CC-0300-S