- Out-of-Stock
MicroSD UHS-1 C0 / C1 Android for ODROID-C0 / C1 / C1+
Storage I/O comparison
To obtain the results in the storage I/O comparison graph, type the following lines at a command prompt. The first command tests the write speed, and the second command tests the read speed:
$ dd if=/dev/zero of=test.tmp oflag=direct bs=500K count=1024
$ dd if=test.tmp of=/dev/null iflag=direct bs=500K count=1024
If you use the eMMC storage, you can get about two to three times faster storage I/O read performance. However, an affordable microSD UHS-1 card can still achieve reasonably fast speeds thanks to the advanced SD 3.01 host controller in the S805 processor. The MicroSD card read performance on C1+ is still about 1.7 times faster then RPi if you use the UHS-1 memory card.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
OS Preinstalled Flash Memory with Linux
OS Preinstalled Flash Memory with Linux
OS Preinstalled Flash Memory with Android
Isopropanol 70% (IPA) is an effective and safe cleaner with low electrical conductivity, supplied in a 5l plastic canister, perfect for professional electronics workshop thanks to its degreasing properties, quick evaporation and precise dosing
No product available!
No product available!
The expansion module is designed to work with a portable computer built into the Raspberry Pi 400 keyboard. The board has two 40-pin connectors placed in a vertical position and a connector for RPI 400 at an angle of 45 °. Waveshare PI400-GPIO-ADAPTER-C
No product available!
No product available!
AVT kit for self-assembly of energy-saving optical siren with LED diodes. AVT790 B
No product available!
1-meter long USB Type-C cable enabling fast data transmission and powering electronic devices with a USB C port, such as smartphones and Macbooks. It works in the USB 3.1 standard with speeds up to 5 Gb/s. Akyga AK-USB-25
No product available!
ROSA3D filament made of high-quality water-soluble PVA. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PVA Natural
No product available!
The 4-channel DC motor driver module is designed to work with the M5Stack sets. Powered with the voltage from 6 to 12 V, it can support encoders. M5Stack DC MOTOR
No product available!
No product available!
The special construction of the braid facilitates installation in all conditions. z28423
No product available!
ROSA3D filament made of high-quality ASA polymer. 0.7 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D ASA Gray
No product available!
No product available!
Printed circuit board with programmed night lamp controller system with time system. AVT1969 A +
No product available!
No product available!
The assembled interface with the FT5557D chip. AVT5557 C
No product available!
No product available!
OS Preinstalled Flash Memory with Android