- Out-of-Stock

16x2 Character LCD (Parallel Interface)
This 16 × 2 LCD packs 32 characters into an outline smaller than that of most two-line displays. This unit uses the HD44780 interface found on most parallel character displays and operates without a backlight.
![]() |
This 16-character, 2-line parallel liquid crystal display achieves a large viewing area in a compact package. It uses the common HD44780 interface (330k pdf), so sample interface code is widely available for a variety of microcontrollers. This LCD is also available with a backlight.
The DDRAM address 0x00 corresponds to the first character of the top line, address 0x0F corresponds to the last character of the top line, address 0x40 corresponds to the first character of the second line, and address 0x4F corresponds to the last character of the second line.
You can find sample HD44780 LCD interface code written for a variety of AVR microcontrollers as part of the Pololu AVR library.
![]() |
Pin | Symbol | Function |
---|---|---|
1 | Vss | ground (0 V) |
2 | Vdd | 5 V logic supply voltage |
3 | Vo | contrast adjustment |
4 | RS | H/L register select signal |
5 | R/W | H/L read/write signal |
6 | E | H/L enable signal |
7-14 | DB0 – DB7 | H/L data bus for 4- or 8-bit mode |
Note: No cables or connectors are included with this product, but a 40×2-pin 0.100" male header strip and 20", 16-conductor ribbon cable can be purchased separately. You can break a 7×2 segment from the header strip and solder it to the 14 through-holes on the left side of the LCD PCB; the ribbon cable will then plug into the header pins (leaving two holes empty). The header pins won’t enforce proper orientation of the cable, so you will need to take care to plug it in to the correct pins. The 8×2 shrouded box header will not work with this LCD.
![]() |
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight |
![]() |
0.100" (2.54 mm) Breakaway Male Header: 2x40-Pin, Straight |
![]() |
16-Conductor Ribbon Cable with IDC Connectors 20" |
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
A module with Acconeer sensor A111. A111 is a one-chip radar (PCR) solution complete with antennas and SPI interface up to 50 MHz. SparkFun Pulsed Radar Breakout A111
No product available!
No product available!
Graphic display 128x64 with LED backlight yellow / green, 93x70mm, extended temperature range
No product available!
AVT kit for self-assembly of a microprocessor-based bird scare. AVT3135 B
No product available!
No product available!
No product available!
No product available!
PCB board ICSP programmer for PIC microcontrollers
No product available!
No product available!
No product available!
No product available!
Ethernet board with mini SD card slot based on W5100 controller for Arduino system
No product available!
No product available!
No product available!
ROSA3D filament made of high-quality PLA granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Glow in the Dark Green
No product available!
No product available!
16x2 Character LCD (Parallel Interface)