![Main view Main view](https://kamami.pl/83599-large_default/lm66200-ideal-dual-diodes-breakout-power-supply-switch-module.jpg)
![Main view Main view](https://kamami.pl/83599-large_default/lm66200-ideal-dual-diodes-breakout-power-supply-switch-module.jpg)
zł11.43 tax excl.
The module is designed for easy and reliable switching between two different power sources. It ensures safe use of two power sources (with voltage from 1.6 to 5.5 V) without the risk of damaging components. Adafruit 5830
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The Adafruit LM66200 Dual Ideal Diode module is an intelligent solution for projects requiring support for two power sources. Designed to easily and reliably switch between two different power supplies, this ideal diode module is a compact solution for applications where reliability, energy efficiency and ease of use are key.
This solution is particularly useful in projects where two power sources are required, such as a battery, DC socket or USB. Adafruit LM66200 allows you to seamlessly switch between them, providing back-voltage protection. It ensures safe use of two power sources without the risk of damaging components. RdsOn of 40 milliohms guarantees minimal voltage drop, which is important in projects with low energy consumption.
Simple operation of the module involves connecting two power sources (with a voltage of 1.6 to 5.5 V) to the Vin1 and Vin2 pins. The higher voltage of the two sources will appear on the Vout pin. The output can be easily disabled by pulling up the On/Enable pin. The module status can be monitored via the Status pin. Thanks to its compact size and breadboard-friendly output, this module is easy to integrate into a variety of projects.
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
A set of 40 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-40-17)
Set of 40 pcs of different colored male-male cables, 17 cm long, for contact plates. CAB_M-M (Rainbow-40-17)
Driver dedicated to servomechanisms equipped with a UART serial interface. It allows you to control up to 253 servos from the ST/SC series, which makes it an ideal solution for walking robots or manipulators projects. Waveshare Bus Servo Adapter (A)
No product available!
KAmodPCA9533 is a module with LED driver from NXP. The module allows you to control the brightness of 4 LEDs using programmable PWM signals (with a frequency from 0.591 Hz to 152 Hz). I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
Module with a bistable button and red LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-R
The LM4950 audio power amplifier module with a power of 3 W per channel, powered by 10-15 VDC, equipped with a 3.5 mm Jack socket for audio input and screw connections for loudspeaker outputs, is equipped with thermal and short-circuit protection. It provides good sound quality with low energy consumption, making it ideal for small audio systems
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 80% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
No product available!
Evaluation set designed for the use of Internet of Things based on ArduCAM-Mini-2MP and ArduCAM-ESP8266-Nano-V2 modules. ArduCAM-Mini-2MP is a module with a 2 megapixel camera with an OV2640 transducer and an ESP8266 chip. Mounting the M12 lens. ArduCAM B0085
Module with a micro SD (TF) card reader. It allows you to connect and operate popular memory cards using a microcontroller. It is commonly used in various devices to store images, sounds or measurement data. KAmodMicroSD
Module with Flash memory W25Q64 with a capacity of 64 Mbit (8 MB). It communicates via the QSPI interface. Adafruit 5633
No product available!
A module with a stereo DAC converter based on the UDA1334A chip. It can generate a signal with a resolution of 16, 20 or 24 bits. It communicates via the I2S interface. Adafruit 4037
No product available!
Isolated USB - RS232/RS485/RS422/TTL converter for industrial applications. Provides easy communication between the USB interface and the RS232, RS485, RS422 and TTL standards. Waveshare USB TO RS232/485/422/TTL
Data logger dedicated to monitoring and analysing electrical signals. It enables easy and precise data collection from various sources, including power systems, industrial automation and other applications. It is powered by a rechargeable battery and uses Bluetooth communication. It has iPad support. Hantek 365E
Stereo audio amplifier with Bluetooth 5.0 communication. It can be powered with the voltage from 9 to 24 V and has two outputs with a power of 50 W. Assembly kit. ZK-502C
Sound card in the form of an expansion module with a USB adapter designed for NVIDIA Jetson Nano development kits. Waveshare Audio Card for Jetson Nano
STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876
The 12V 10W USB Step-Up Converter Module converts 4.2-5.2V input voltage to 12V DC output voltage, with a maximum current of 1A and a conversion efficiency of 96%. The device can operate in a wide temperature range, from -40°C to 85°C, which makes it ideal for powering various electronic devices in harsh environments.
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
The module is designed for easy and reliable switching between two different power sources. It ensures safe use of two power sources (with voltage from 1.6 to 5.5 V) without the risk of damaging components. Adafruit 5830