Raspberry Pi HAT Expansion - pin expander for Raspberry Pi Pico

The Raspberry Pi Debug Probe is an affordable tool that combines a USB-UART debugger and converter. Includes the necessary hardware and wiring needed to quickly debug the Raspberry Pi Pico, RP2040 microcontrollers, and other ARM Cortex-based MCUs. Raspberry Pi SC0889

Module with 4-digit 8-segment LED display. Communication via the SPI interface. Waveshare Pico-8SEG-LED

Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM637

4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178

Module with 3-color e-Paper display with a diagonal of 2.13" and a resolution of 212x104 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.13-B

Base board designed for Raspberry Pi Pico. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI-NB

Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635

Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. Waveshare Pico-SIM868-GSM/GPRS/GNSS

Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor

The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare Pico-LoRa-SX1262-433M

Uninterruptible power supply module for Raspberry Pi Pico, allowing you to continue working and safely shut down after a power failure. Waveshare Pico-UPS-B

Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22670

Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468

Module with e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.9 

A set with a 64 MP camera and an adapter enabling the transmission of the CSI signal via an HDMI cable. Designed for Raspberry Pi and Jetson Nano minicomputers. The adapter module is also equipped with an audio connector and allows you to connect a microphone and headphones. ArduCAM B0399B0091

Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Pimoroni PIM629