![Pico-RGB-LED - module with 16x10 RGB LED matrix display for Raspberry Pi Pico Pico-RGB-LED - module with 16x10 RGB LED matrix display for Raspberry Pi Pico](https://kamami.pl/44554-large_default/pico-rgb-led-module-with-16x10-rgb-led-matrix-display-for-raspberry-pi-pico.jpg)
![Pico-RGB-LED - module with 16x10 RGB LED matrix display for Raspberry Pi Pico Pico-RGB-LED - module with 16x10 RGB LED matrix display for Raspberry Pi Pico](https://kamami.pl/44554-large_default/pico-rgb-led-module-with-16x10-rgb-led-matrix-display-for-raspberry-pi-pico.jpg)
zł60.41 tax excl.
Module with 16x10 RGB LED matrix display (160 diodes) designed to work with the Raspberry Pi Pico. Communicates via a digital interface. Waveshare Pico-RGB-LED
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Module with 16x10 RGB LED matrix display (160 diodes) designed to work with the Raspberry Pi Pico. It uses a built-in driver and communicates via a digital interface. At the bottom of the board there is an angular connector enabling cascade connection of modules. The display is powered with the voltage of 5 V. Full documentation with examples is available on the product Wiki page.
Attention!
The kit does not include the Raspberry Pi Pico. They must be purchased separately.Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
Module with LCD IPS display, 1.14" diagonal and 240x135 px resolution. Communication via SPI interface. Waveshare Pico-LCD-1.14
Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22656
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22670
RGB LED matrix display with a resolution of 64x32 (2048 LED) for Raspberry Pi Pico. Equipped with RTC clock, light sensor, buzzer and IR receiver. Waveshare Pico-RGB-Matrix-P3-64x32
Module with a matrix LED RGB 7x16 display (112 LEDs) designed to work with the Raspberry Pi Pico. It communicates via a digital interface. Pimoroni PIM546
The module with a matrix LED display 17x7 (119 LEDs) designed to work with the Raspberry Pi Pico. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM545
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22663
No product available!
Module with 16x10 RGB LED matrix display (160 diodes) designed to work with the Raspberry Pi Pico. Communicates via a digital interface. Waveshare Pico-RGB-LED