![Bottom view Bottom view](https://kamami.pl/79634-large_default/universal-e-paper-hat-for-pico-universal-module-for-e-paper-displays-for-raspberry-pi-pico.jpg)
![Bottom view Bottom view](https://kamami.pl/79634-large_default/universal-e-paper-hat-for-pico-universal-module-for-e-paper-displays-for-raspberry-pi-pico.jpg)
zł38.93 tax excl.
Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. SB Components 26241
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. Supports displays with resolutions of 800x480 pixels (7.5"), 648x480 pixels (5.83"), 400x300 pixels (4.2") and 296x128 pixels (2.9"). There are four buttons on the board at the user's disposal. The board can also be connected to a battery with a voltage of up to 7 V. The module is a universal adapter for e-Paper displays, which are characterized by high contrast of the displayed image and consume electricity only when the displayed content changes. Full documentation and usage examples are available on the product page.
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
Module with LCD IPS display, 1.14" diagonal and 240x135 px resolution. Communication via SPI interface. Waveshare Pico-LCD-1.14
Module with a round 1.28" IPS LCD display and a resolution of 240x240 px. Communication is via the SPI interface. SB Components 21697
Bluetooth 5.1 module (BLE, SPP) designed to work with the Raspberry Pi Pico. It communicates via the UART interface using AT commands. Waveshare Pico-BLE
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM627
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Pimoroni PIM556
A set for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM640
No product available!
RGB LED matrix display with a resolution of 64x32 (2048 LED) for Raspberry Pi Pico. Equipped with RTC clock, light sensor, buzzer and IR receiver. Waveshare Pico-RGB-Matrix-P3-64x32
A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and four sets of male strips 2x20 pins. Waveshare Pico-Quad-Expander
Monochrome VGA camera module with HM0360 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0319
Module with OLED display, 1.3" diagonal and 64x128 px resolution. Communication via SPI or I2C interface. Waveshare Pico-OLED-1.3
Base board designed for Raspberry Pi Pico. Equipped with an LCD display, motors controller, buzzer and buttons and a breadboard. Pimoroni PIM550
1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277
Module with a three-dimensional LED matrix 4x4x4 (64 LED) dedicated to the Raspberry Pi Pico. It allows you to control each LED and obtain 3D lighting effects. SB Components 22670
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
A pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets (one male and one female) of 2x20 pin strips. SB Components 20812
Module with LCD TFT display with a diagonal of 1.8" and a resolution of 160x128 px. Communication via SPI interface. Waveshare Pico-LCD-1.8
Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. SB Components 26241