PiCowbell DVI Output - module with mini HDMI connector for Raspberry Pi Pico
ID: 1185638
5906623431717
zł33.12
Tax included
zł26.93 tax excl.
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745
Description
Module with a mini HDMI connector dedicated to the Raspberry Pi Pico. It allows you to display images and graphics from the microcontroller directly to an HDMI monitor or TV. It does not support audio streaming. The board has a reset button and a STEMMA QT connector for easy connection of additional sensors. In addition, the I2C pins of the HDMI connector are connected to the I2C interface, which allows you to read the EDID EEPROM of the displays. User also has available CEC, Utility and HotPlug pads. Full documentation is available on the product page.
Features
- Mini-HDMI connector
- STEMMA QT/Qwiic connector
- Utility, CEC and HotPlug pins
- reset button
- Slide switch
- Dimensions: 52.5 x 20.2 x 4.9mm
Kit contains
- PiCowbell DVI Output Module
- 2 x 20-pin male goldpin connector
1185638
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 341
Available
Starter kit containing Raspberry Pi Pico, necessary connectors and a microUSB cable. The kit is recommended for people programming in MicroPython
zł27.90
Delivery date unknown
No product available!
Other products in the same category (16)
Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636
zł146.07
24h
Available quantity: 4
Available
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
zł76.48
24h
Available quantity: 2
Available
Extension module designed for Raspberry Pi Pico boards. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5728
zł69.15
24h
Available quantity: 5
Available
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376
zł48.70
24h
Available quantity: 2
Available
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
zł233.07
24h
Available quantity: 2
Available
Module with a precise clock RTC DS3231 dedicated to the Raspberry Pi Pico. Communication via the I2C interface. SB Components 21420
zł115.60
24h
Available quantity: 3
Available
Programmable buzzer controller with six buttons, designed to work with Raspberry Pi Pico W and offering pinouts for many pins. It is ideal as a remote control for the Kitronik Autonomous Robotics (Buggy) platform, and thanks to its compact size and lack of a display, it is a cost-effective solution for controlling robots and vehicles in DIY projects. Kitronik 5353
zł57.58
24h
Available quantity: 3
Available
The Raspberry Pi Debug Probe is an affordable tool that combines a USB-UART debugger and converter. Includes the necessary hardware and wiring needed to quickly debug the Raspberry Pi Pico, RP2040 microcontrollers, and other ARM Cortex-based MCUs. Raspberry Pi SC0889
zł54.94
24h
Available quantity: 107
Available
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes and two areas of 8x20 holes with a pitch of 2.54 mm with marked pin labels. SB Components 21505
zł20.36
4 weeks
No product available!
A power supply module with a LiPo and Li-Ion battery charger dedicated to the Raspberry Pi Pico boards. It has a built-in button and over-discharge and overload protection. Pimoroni PIM557
zł60.79
4 weeks
No product available!
Kit for controlling soil moisture of cultivated plants. Equipped with a Raspberry Pi Pico W-based controller and soil moisture sensors with wires. Pimoroni PIM627
zł287.33
4 weeks
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
zł19.46
24h
Available quantity: 4
Available
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173
zł525.86
24h
Available quantity: 2
Available
8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B
zł75.35
24h
Available quantity: 4
Available
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
zł222.00
4 weeks
No product available!
The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924
zł95.19
24h
Available quantity: 2
Available
Mini HDMI module for Raspberry Pi Pico. It allows you to send a video signal, e.g. to a monitor or TV. It is equipped with a STEMMA QT connector. Adafruit 5745