![Pico-10DOF-IMU - module with 10 DoF IMU sensor for Raspberry Pi Pico Pico-10DOF-IMU - module with 10 DoF IMU sensor for Raspberry Pi Pico](https://kamami.pl/41433-large_default/pico-10dof-imu-module-with-10-dof-imu-sensor-for-raspberry-pi-pico.jpg)
![Pico-10DOF-IMU - module with 10 DoF IMU sensor for Raspberry Pi Pico Pico-10DOF-IMU - module with 10 DoF IMU sensor for Raspberry Pi Pico](https://kamami.pl/41433-large_default/pico-10dof-imu-module-with-10-dof-imu-sensor-for-raspberry-pi-pico.jpg)
zł89.77 tax excl.
Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The module with the 10 DoF IMU sensor is designed to work with the Raspberry Pi Pico. It combines the ICM20948 chip (3-axis accelerometer, 3-axis gyroscope and 3-axis magnetometer) and LPS22HB (barometer). It enables comprehensive measurement of motion parameters with 16-bit resolution, from acceleration and rotational speed to orientation. The module is powered by 5V and has extended pins, so it can be stacked. Communication takes place via the I2C interface. The module will be used in the projects of moblin robots and drones. Full documentation with examples is available on the product wiki page.
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also includes the necessary connectors, cables, power supply and housing - heat sink
No product available!
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also includes the necessary connectors, cables, power supply and housing - heat sink
No product available!
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also includes the necessary connectors, cables, power supply and housing - heat sink
No product available!
Kit containing Raspberry Pi Pico and Raspberry Pi 4B 4 GB. The kit also includes the necessary connectors, cables, power supply and housing - heat sink
No product available!
Keyboard module designed for Raspberry Pi Pico. It is equipped with 16 buttons with RGB backlight. Pimoroni PIM551
Module with a precise clock RTC DS3231. Communication via the I2C interface. Waveshare Pico-RTC-DS3231
Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM638
The PMSA003 air quality sensor module to work with the Raspberry Pi Pico. It allows for a analysis of the amount of pollutants in the environment based on the concentration of PM1.0, PM2.5 and PM10 particles. SB Components 21819
Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio
8-channel module with relays designed to work with the Raspberry Pi Pico. Has built-in power isolation. Perfect for industrial applications. Waveshare Pico-Relay-B
4-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21178
No product available!
The board with prototype holes is dedicated to the Raspberry Pi Pico. It offers an area of 6x20 holes with a 2.54 mm pitch with marked pins. SB Components 21499
Uninterruptible power supply module for Raspberry Pi Pico, allowing you to continue working and safely shut down after a power failure. Waveshare Pico-UPS-B
2-channel module with relays designed to work with the Raspberry Pi Pico. It can switch signals up to 120 V AC or 24 V DC and currents up to 2 A. SB Components 21376
Module for building a weather station equipped with a controller based on Raspberry Pi Pico W. Pimoroni PIM628
Prototype board designed to work with the Raspberry Pi Pico. It is equipped with 120 holes with a 2.54 mm pitch and allows you to build your own circuits and connections, while maintaining compact dimensions. Pimoroni PIM554
Module with BME688 chip, microphone and LTR-559 light intensity. Equipped with a display, it is dedicated to the Raspberry Pi Pico/Pico W. Pimoroni PIM635
The servo control module is designed for the Raspberry Pi Pico. It uses the PWM pins of the microcontroller and has 16 3-pin connectors compatible with the interface used in the servos. Waveshare Pico-Servo-Driver
QVGA monochrome camera module with HM01B0 sensor working with Raspberry Pi Pico. It uses 1 bit video interface and I2C to configure the registers. ArduCAM B0315
The module with screw connectors is dedicated to the Raspberry Pi Pico boards. It allows you to easily create prototypes, ensuring a stable connection of wires with the board. DFRobot DFR0924
Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU