- Out-of-Stock
The module with the 10 DoF IMU sensor is designed to work with the Raspberry Pi Pico. It combines the ICM20948 chip (3-axis accelerometer, 3-axis gyroscope and 3-axis magnetometer) and LPS22HB (barometer). It enables comprehensive measurement of motion parameters with 16-bit resolution, from acceleration and rotational speed to orientation. The module is powered by 5V and has extended pins, so it can be stacked. Communication takes place via the I2C interface. The module will be used in the projects of moblin robots and drones. Full documentation with examples is available on the product wiki page.


Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Version with soldered connectors. Raspberry Pi SC0917
WindSensor Pro by BleBox is an advanced wind sensor that measures current, maximum, and average wind speeds. With the wBox app, you can monitor and analyze historical data and set notifications for strong winds. The sensor automatically controls awnings, blinds, and shutters, protecting them from damage. With an external antenna for extended WiFi range
No product available!
No product available!
No product available!
No product available!
No product available!
Male terminal block, angled, 12-pin. Pitch 3.5mm. Height 9.2mm. KF2EDGR
No product available!
No product available!
No product available!
Pololu Serial 8-Servo Controller (partial kit)
No product available!
No product available!
The DDS generator with alphanumeric display allows you to generate sine, rectangular or triangle waveforms with a frequency of up to 5MHz. The device can also be used to measure frequencies in the 1Hz-60MHz range.
No product available!
No product available!
Assembled universal 24V power supply module. AVT1895 / 24 C
No product available!
No product available!
32-bit ARM Cortex-M0 MCU, 128 kB Flash, 8 kB SRAM, LQFP64, RoHS
No product available!
No product available!
Module with 10 DoF IMU ICM20948 sensor (accelerometer, gyroscope and magnetometer) and LPS22HB (barometer). Communication via the I2C interface. Waveshare Pico-10DOF-IMU