KAmodPCF8883T – module with capacitive touch sensor
ID: 576065
5906623432721
€4.80
Tax included
€3.90 tax excl.
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.
Description
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The board is equipped with a Pmod GPIO standard connector with one digital output informing about the status of the sensor output depending on the selected mode of operation and a KAMAMI connector, allowing easy connection of the module to development kits. The module has a probe placed on the PCB and a diode indicating the state of the chip. Due to its small dimensions, the product can be used in many development projects.
The module is equipped with jumpers enabling configuration of the system's operating mode. One of three jumpers may be on. Allows you to select the system operation in the mode:
- PB (Push Button) - the output is high as long as the probe event occurs
- PUL (Pulse) - the event is active for 1 second after the event occurs on the probe
- TOG (Toggle) - the occurrence of an event on the probe causes a change in the state on the output pin
Features
- NXP PCF8883T system
- Dynamic proximity sensor
- Wide input capacity range
- Automatic calibration
- Configurable operating mode (push-button, toggle, pulse)
- Wide operating temperature range: -40oC to +85oC
- Probe placed on the PCB
- Diode signaling the status of the OUT output
- Connector compatible with the Pmod GPIO standard
- Connector in accordance with the KAMAMI standard
- Built-in jumpers for selecting the system operation mode
- Can be supplied with voltage from 3 to 9 V
- Mounting holes with a diameter of 2.5 mm
- Dimensions: 51.3 mm x 20.3 mm x 10 mm
576065
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30
€1.66 Delivery date unknown No product available!
Capacitive proximity switch with auto-calibration, large voltage operating range and very low power consumption, SOIC8, NXP, RoHS
Delivery date unknown No product available!
Set of 40 pieces of male-female connection cables, in various colors, 17 cm long. CAB_M-F (Rainbow-40-17)
€1.47 Delivery date unknown No product available!
A set of 40 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-40-17)
€1.37 24hAvailable quantity: 303 Available
Other products in the same category (16)
KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1
€1.78 24hAvailable quantity: 1339 AvailableFour relay output module for Raspberry Pi 4B, Pi 3B+ Pi3B, Pi2, Pi+, Pi minicomputers.
€9.24 24hAvailable quantity: 224 AvailableKAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
€6.97 24hAvailable quantity: 200 Available- Available
KAmodMC3635 is a module with the MC3635 three-axis accelerometer from mCube. The sensor allows the measurement of acceleration in the range of ±2g/±4g/±8g/±12g/±16g, the measurement frequency is from 14 to 1300 Hz. Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMC3635
€3.59 24hAvailable quantity: 454 AvailableKAmodMPL3115A2 is a module with an atmospheric pressure sensor MPL3115A2 from NXP. Sensor allows to make a measurement in the range of 200...1100hPa (20...110kPa). Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMPL3115A2
€6.72 24hAvailable quantity: 203 AvailableKAmodDIGIpot is a miniature digital potentiometer module. It allows, by means of two PU / PD inputs, to change the resistance value between the outputs A, W, B (compatible with the outputs of the analog potentiometer), using buttons or outputs of the microcontroller. Adjustment in 32 steps, value 10k.
€4.80 24hAvailable quantity: 174 Available- Available
KAmodRPi-GPRS-GPS is an overlay for Raspberry Pi 4 / 3B + / 3B / 2B / B + computers, which allows you to enrich the system with the ability to send data via GPRS, SMS transmission or work as a module for Bluetooth communication. This extension also offers the ability to receive satellite data from location systems - GPS and GLONASS.
€55.19 24hAvailable quantity: 48 Available- €1.42 24hAvailable quantity: 480 Available
Simulation set for Siemens S7-1200 PLC devices. Using this set, it is possible to verify the operation of a program written for a PLC by applying the appropriate states to the digital inputs, to the analogue (ADC) inputs voltages from the built-in or external sensors. LED status monitoring is possible
€60.23 24hAvailable quantity: 71 AvailableModule with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.
€21.45 24hAvailable quantity: 185 Available- Available
KAmodQTR8A is a module with eight photointerrupter sensors KTIR0711S. It allows to detect edge or line. Thanks to the analog outputs, is possible to connect a module to the e.g. comparator. The module can be used in analisze of the floor e.g. by Linefollower vehicles.
€9.13 24hAvailable quantity: 6 Available- Available
Relay output module for Raspberry Pi 4B, Pi 3B+ Pi3B, Pi2, Pi+, Pi minicomputers.
€11.81 24hAvailable quantity: 152 Available
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.