![Aluminum mounting profile for LED strips, U-shaped, black with a black cover](https://kamami.pl/104497-large_default/aluminum-mounting-profile-for-led-strips-u-shaped-black-with-a-black-cover.jpg)
![Aluminum mounting profile for LED strips, U-shaped, black with a black cover](https://kamami.pl/104497-large_default/aluminum-mounting-profile-for-led-strips-u-shaped-black-with-a-black-cover.jpg)
zł11.15 tax excl.
Aluminum mounting profile for LED strips. It is U-shaped, black in color with a black mask
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Aluminum mounting profile dedicated to LED strips up to 10 mm wide. It is easy to install, incl. with glue or thanks to the handles included in the set.
Provides protection against dirt. The LEDs are covered with a special cover made of polycarbonate, which ensures good light diffusion. The profile can be mounted both on the surface and built into prepared recesses.
The profile is not waterproof, therefore it can be used for lighting installations inside buildings and in places not exposed to direct weather conditions.
Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
Green LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21
RGB LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21
Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21
Corner connector for U-shaped mounting profiles. In black
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1100 mA, offering a wide beam angle of 120 °
Aluminum mounting profile for LED strips. It is W-shaped, black in color with a black mask
LED 3 mm IR 940 [nm], angle 25 degrees; power max 100 mW typ. (50mA) (1.5V), RoHS
No product available!
FLUX LED 7.62 x 7.62 [mm] 5mm ultra red, angle 90 degrees; light 1200 mcd (20mA) (2.0V) df630 nm, anode at the corner marked
No product available!
LED RGB WS2812B, Black Strip, 5m, 60LEDs / m, waterproof IP67
Module with green LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-G
Module with yellow LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-Y
1-channel LED dimmer with a maximum output current of 8 A. Works with LED power supplies with a voltage from 12 to 24 V
5 mm Green Diffused LED, LC 2mA, 45 degree angle; light intensity 100 mcd (2mA) (1.85V); df 568nm
No product available!
Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage
Waterproof LED indicator with a diameter of 8 mm, powered with the voltage from 9 to 12 V. White color
RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5V by the pads located on the bottom of the board and controlled by the SPI interface. SparkFun COM-15047
Aluminum mounting profile for LED strips. It is W-shaped, black in color with a milky mask
Module with LED strip designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18387
Aluminum mounting profile for LED strips. It is U-shaped, black in color with a black mask