NeoPixel Mini PCB - Pack of 5
ID: 210902
zł29.19
Tax included
zł23.73 tax excl.
Adafruit 1612
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
1612 - NeoPixel Mini PCB - Pack of 5 -
These are the smallest NeoPixel breakouts around! Tiny, bright RGB pixels is your project. These little PCBs are only 8mm x 10mm and have two pads on the back for sold wires. These ultra-bright LEDs have a constant-current driver. The pixels are chainable - so you need 1 pin / wire to control as many LEDs as you like.
These pixels have a full 24-bit color ability with PWM taken care of by the chip. Since the LED is so bright, you need to be less active. The driver is just a few of them.
Each pixel draws as much as 60mA (all three RGB LEDs on for full brightness white). An Arduino can drive up to 500 pixels at 30 FPS (it will run out of RAM after that). Using ribbon cable you can string these up to 6 "apart (after that, you can get power droops and data corruption)
Each order comes with 5 individually controllable pixel buttons.
Our detailed NeoPixel Uberguide has everything you need to use. NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO / Duemilanove / Diecimila, Flora / Micro / Leonardo, Trinket / Gemma, Arduino Due & Arduino Mega / ADK (all versions)
These pixels have a full 24-bit color ability with PWM taken care of by the chip. Since the LED is so bright, you need to be less active. The driver is just a few of them.
Each pixel draws as much as 60mA (all three RGB LEDs on for full brightness white). An Arduino can drive up to 500 pixels at 30 FPS (it will run out of RAM after that). Using ribbon cable you can string these up to 6 "apart (after that, you can get power droops and data corruption)
Each order comes with 5 individually controllable pixel buttons.
Our detailed NeoPixel Uberguide has everything you need to use. NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO / Duemilanove / Diecimila, Flora / Micro / Leonardo, Trinket / Gemma, Arduino Due & Arduino Mega / ADK (all versions)
NeoPixel Mini PCB - Pack of 5 ( 5:00 )
- Dimensions: 8mm / 0.3 "x 10mm / 0.4" x 3mm / 0.1 "
- 0.4 "(10mm) diameter circle PCB, 0.1" (3mm) total thickness
- Weight: 0.3g
- 800 KHz speed protocol
- Chainable design
- 5 VDC power (can run as low as 3.5V but color will be dimmed), constant current 18.5mA per LED (~ 55mA max total per pixel)
210902
Other products in the same category (16)
Module with 10 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020131
zł27.80
24h
Available quantity: 3
Available
COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 400 mA, offering a wide beam angle of 120 °
zł9.84
24h
Available quantity: 13
Available
Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control
zł7.48
6 weeks
No product available!
LED matrix display, consisting of 40 LEDs WS2812 type (5 lines, 8 kolumm), allows you to create interesting lighting effects using one control line
zł40.15
24h
Available quantity: 3
Available
3 mm LED matrix. The matrix contains 35 LEDs (5x7 system) in red. Connection diodes are a common anode.
zł4.31
24h
Available quantity: 4
Available
IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. YELLOW matrix. Adafruit 3135
zł70.74
24h
Available quantity: 1
Available
HK Blue 16 LED Circular Light Board with Lead (28512)
zł13.47
24h
Available quantity: 1
Available
Linear LED strip consisting of 12 rectangular LEDs, independent and arranged one behind the other. It consists of 8 green and 4 red LEDs.
zł4.86
6 weeks
No product available!
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM491
zł86.38
24h
Available quantity: 6
Available
Flexible 8x32 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0462
zł414.47
4 weeks
No product available!
Flexible 16x16 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0463
zł414.47
4 weeks
No product available!
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 700 mA, offering a wide beam angle of 120 °
zł17.69
24h
Available quantity: 7
Available
Beam is a beginner-friendly PCB with 120 LEDs arranged in a 5x24 grid, a great size to display text or animations in your project. Plug in one to four to create a long blinky display that can be controlled by any 3-5V microcontroller or microcomputer (e.g. Arduino, Raspberry Pi, Particle, and more). Adafruit 3668
zł203.98
24h
Available quantity: 1
Available
Module with 16 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020171
zł48.86
24h
Available quantity: 2
Available
LED diode 10LED red - bargraph, replacement for: DC-10EWA
zł6.00
24h
Available quantity: 8
Available
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
zł79.06
24h
Available quantity: 4
Available
Adafruit 1612