![LED RGB WS2812B 8x32 matrix LED RGB WS2812B 8x32 matrix](https://kamami.pl/19149-large_default/led-rgb-ws2812b-8x32-matrix.jpg)
![LED RGB WS2812B 8x32 matrix LED RGB WS2812B 8x32 matrix](https://kamami.pl/19149-large_default/led-rgb-ws2812b-8x32-matrix.jpg)
zł401.68 tax excl.
RGB WS2812B LED matrix with 1mm pitch
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
RGB WS2812B LED matrix with 1mm pitch
Description:
The three-color LED WS2812B (RGB) matrix.
A special feature of the WS2812B diodes is the RGB controller in the structure, which interprets the signals from the diode input (6-pin housing) and at the right moment shifts them to its output or controls the LED structure.
Each of the diodes is connected in series with an adjacent one (signal output to the entrance of an adjacent diode), thanks to which the whole creates a 256-cell shift register. Control of the entire matrix takes place via a single wire, to which the pulses are suitably formed, addressing the kolen of the WS2812B diodes. After addressing the entire diode array (after 256 shifts of values to subsequent diodes), there is a pulse allowing the display of the contents of each cell (diodes WS2812B), thus creating an 8x32 image.
The matrix has three connectors; input, output and additional power connector. The matrices can be combined into series (bearing in mind the technical limits of the control system and matrices). It is also possible to connect the matrix with a tape or other module with a WS2812B diode.
The WS2812B LED can display 16777216 colors (256 intensity levels of each RGB component).
Features:
To download:
LED RGB WS2812B, Black Strip, 5m, 60LEDs / m, waterproof IP67
No product available!
LED diode 10LED yellow - bargraph, replacement for: DC-10YWA
Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472
RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5V by the pads located on the bottom of the board and controlled by the SPI interface. SparkFun COM-15047
KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1
Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control
The module with an 8x8 LED matrix designed for Wemos D1 Mini
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 500 mA, offering a wide beam angle of 120 °
Linear LED strip consisting of 12 rectangular LEDs, independent and arranged one behind the other. It consists of 8 green and 4 red LEDs.
IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. RED matrix. Adafruit 3134
LED backlight. Yellow. light 2.7 lm 12V 20mA 595nm, waterproof housing, easy self-adhesive assembly
This is the tiniest little LED grid, with 64 full RGB color pixels in a square. For use with Arduino and Raspberry Pi. Adafruit 3444
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM333
3 mm LED matrix. The matrix contains 35 LEDs (5x7 system) in red. The diodes are connected by a common cathode.
Module with 10 addressable RGB LEDs APA102C. Each of the LEDs is independently controlled via the I2C interface, and the line address is modified, so that the modules can be connected with each other. SparkFun COM-18354
IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. GREEN matrix. Adafruit 3136
RGB WS2812B LED matrix with 1mm pitch