![8x8 LED matrix display - red 8x8 LED matrix display - red](https://kamami.pl/38771-large_default/8x8-led-matrix-display-red.jpg)
![8x8 LED matrix display - red 8x8 LED matrix display - red](https://kamami.pl/38771-large_default/8x8-led-matrix-display-red.jpg)
zł19.10 tax excl.
8x8 pixel LED matrix display with red LEDs. The module is equipped with the 74HC595 controller and communicates via the I2C interface
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
8x8 pixel LED matrix display with red LEDs. The module is equipped with the 74HC595 controller and communicates via the I2C interface. It is possible to connect modules in series.
Cables for evaluation boards, set of 10 pcs., blue colour
Cables for evaluation boards, set of 10 pcs., red colour
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
A set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
8 x 8 dot dot matrix module, MAX7219 controller, RoHS
The module is equipped with three RGB SK6812 LEDs. It is designed to work with the M5Stack sets. Communicates via a single-wire digital interface. M5Stack U003
Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170
Flexible 8x8 RGB LED matrix module. The set uses addressable SK6812/WS2812B diodes. DFRobot DFR0461
No product available!
Linear LED strip consisting of 12 rectangular LEDs, independent and arranged one behind the other. It consists of 8 green and 4 red LEDs.
Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM334
Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745
No product available!
9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: BLUE. Adafruit 2973
No product available!
The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243
IS31FL3731 LED Matrix Opto Feather Platform Evaluation Expansion Board. YELLOW matrix. Adafruit 3135
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
Module with 117x7 LED matrix display (77 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM442
COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 700 mA, offering a wide beam angle of 120 °
The ring has sixteen RGB WS2812 diodes, controlled by means of serial signals. The module can be supplied with voltage from 4-7V, only one signal line is required to control it. NeoPixel Ring 16 x WS2812
No product available!
Module with LED strip designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18387
8x8 pixel LED matrix display with red LEDs. The module is equipped with the 74HC595 controller and communicates via the I2C interface