Two-button module with 4 colored overlays. The board is equipped with a...
Grove vertical socket for surface mounting, 4-pin, pitch 2.0 mm. Set of...
A set with a radio transmitter and receiver operating at 315 MHz. The...
Module with the LIS3DHTR 3-axis accelerometer. The board is equipped...
The module with an incremental encoder with channels A and B. The board...
Module with driver for 64x32 or 32x16 LED matrix displays. The board is...
Module with SHT31 temperature and humidity sensor. The board is equipped...
Set with mini propeller, DC motor and module with motor controller....
A small, low-power motor with a 5:1 metal gear, 6 V operating voltage, 0.02 A to 0.36 A power consumption, 2500 RPM speed and a maximum torque of 0.05 kg * cm. Pololu 1100
|DC motor power||LP|
|Shaft diameter||3 mm|
|Obustronny wał silnika||Nie|
|Power supply voltage||6V|
5:1 Micro Metal Gearmotor
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), low-current brushed DC motor with 5:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.
Key specs at 6 V: 2500 RPM and 50 mA free-run, 1 oz-in (0.1 kg-cm) and 0.36 A stall.
|Dimensions of the Pololu micro metal gearmotors with precious metal brushes: low-power (LP), medium-power (MP), and high-power (HP). Units are mm over [inches].|
|Dimensions of the Pololu micro metal gearmotors with carbon brushes (HPCB). Units are mm over [inches].|
In terms of size, these gearmotors are very similar to Sanyo’s popular 12 mm NA4S DC gearmotors, and gearmotors with this form factor are occasionally referred to as N20 motors. The versions with carbon brushes (HPCB) have slightly different terminal and end-cap dimensions than the versions with precious metal brushes, but all of the other dimensions are identical.
Note: The gearbox on the 1000:1 and 1000:1 HP micro metal gearmotors is 12.5 mm long. All of the other micro metal gearmotors have 9mm-long gearboxes, as shown in the above dimension diagram.
|Pololu Wheel 32×7mm Pair - Black||Pololu Wheel 32×7mm Pair - White||Pololu Wheel 40×7mm Pair - Red|
|Black Pololu Wheels with 90, 80, 70, 60, 40, and 32 mm diameters (other colors available).|
|Black micro metal gearmotor mounting bracket pair with included screws and nuts.||White micro metal gearmotor mounting bracket pair with included screws and nuts.||Pololu micro metal gearmotor bracket extended with micro metal gearmotor.|
|Magnetic Encoder assembled on a Micro Metal Gearmotor with Extended Motor Shaft||Magnetic Encoder assembled on a Micro Metal Gearmotor with Extended Motor Shaft||Magnetic Encoder with Side-Entry Connector assembled on a Micro Metal Gearmotor with Extended Motor Shaft|
|DRV8838 Single Brushed DC Motor Driver Carrier.||Pololu A4990 Dual Motor Driver Shield for Arduino, bottom view.||DRV8835 dual motor driver carrier.|