Order and pay in
for same day shipping
16-channel logic analyzer with a sampling frequency of 200 MHz. It can...
Scissors for electricians.
YATO YT-81500 19mm cable harness tape. The tape is intended for...
Black PVC electrical insulating tape, dimensions: 15mm x 20m x 0.13mm.
Set of 10 pieces of PVC electrical insulating tapes with dimensions of...
Voltage tester in the range of 12 - 250 V. The indicator is intended for...
Insulated Phillips screwdriver YT-28245
Bitscope Micro is a miniature measuring instrument with a USB interface, it can act as an 8-channel logic analyzer (40MS / s, 3.3V or 5V) or a 2-channel oscilloscope (bandwidth up to 20MHz). In addition, Bitscope can generate a clock signal as well as sinusoidal, triangular, rectangular and saws
Bitscope Micro Model 5 is a miniature tool that can act as a 2-channel oscilloscope and 8-channel logic analyzer. An additional advantage is the built-in waveform generator (sine, triangle, rectangle, saw) and clock signal generator.
Software for BitScope Micro works in the following operating systems:
Bitscope Micro can act as a 2-channel oscilloscope with a bandwidth of up to 20MHz with 1MΩ / 20pF compensated inputs. Small adapters can be used to make adapters that can use standard oscilloscope probes. Using probes 10: 1 it is possible to measure signals with voltages greater than 12V.
The probe adapter is NOT part of the kit
Six channels (L0..L5) are adapted to work with 3.3V and 5V logic levels, inputs have an impedance of 100kΩ / 5pF, so to double the voltage range of the tested signals, a 100k resistor must be connected in series. The oscilloscope lines (CHA and CHB) can also be used as logic analyzer lines (L6 and L7), they have the additional advantage of a configurable threshold for detecting line state changes, so you can examine lines with other logic levels (eg 1.8V or 12V) .