![QTRX-HD-13A - module with 13 reflectance sensor with analog output QTRX-HD-13A - module with 13 reflectance sensor with analog output](https://kamami.pl/44619-large_default/qtrx-hd-13a-module-with-13-reflectance-sensor-with-analog-output-pololu-4413.jpg)
![QTRX-HD-13A - module with 13 reflectance sensor with analog output QTRX-HD-13A - module with 13 reflectance sensor with analog output](https://kamami.pl/44619-large_default/qtrx-hd-13a-module-with-13-reflectance-sensor-with-analog-output-pololu-4413.jpg)
zł87.46 tax excl.
Module with 13 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4413
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Reflectance sensor consisting of array 13 QTRX optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are high density (HD) and the distance between them is 4 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 31 mA. The optimum distance from the sensor to the ground is 10 mm and the maximum distance is 40 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Data sheet
Dual motor controller that allows you to control two DC motors with 2.7-10.8V voltage and 1.2A continuous current per channel. Pololu 2130
No product available!
4WD car chassis construction kit. It can be used as a base for building a robot
Module with the ATMega4809 microcontroller from the AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has two 15-pin connectors equipped with GPIO, SPI, I2C, PWM, USART, DAC and ADC. Arduino ABX00028
Module with 13 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4113
Front sensor module of the Zumo 32U4 robot. It is included as part of the Zumo 32U4 robot kit and built into the assembled versions of the Zumo 32U4 robot. The set includes additional infrared connectors and LEDs. Pololu 3122
No product available!
Module with 1 optocoupler type QTRXL with RC (digital) output. It is supplied with the voltage from 2.9 to 5.5 V, detects objects at a distance of up to 80 mm. Pololu 4541
No product available!
Module with 5 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4305
Contrast sensor module. It has two integrated operating modes: analog and digital. It has the ability to set the digital mode for color detection. DFRobot SEN0147
Module with 7 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4447
No product available!
Module with 3 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4103
Module with 7 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4307
Module with five ITR20001/T reflective sensors. Powered with the voltage from 3.3 V to 5 V, it has analog outputs. It can detect objects at a distance of up to 5 mm. Waveshare Tracker Sensor
Module with 11 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4311
Module with 8 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4248
No product available!
Module with 31 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4331
Module with 25 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4325
Module with 5 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4245
Module with 1 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4441
Module with 13 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4413