ArduCAM 12MP IMX708 Quad-Camera Kit - a set with four IMX708 cameras

Description

A set with four IMX708 cameras with a resolution of 12 MP and an expansion module for Raspberry Pi, which allows you to simultaneously connect four cameras to a minicomputer. The sensor used has a 12 MP matrix and a lens with a 120° viewing angle. The module is connected to the evaluation set via a dedicated socket and FPC cable and uses the MIPI-CSI interface developed specifically for cooperation with cameras. The expansion module allows you to connect four cameras via MIPI connectors to one MIPI connector of the minicomputer. It has support for cameras up to 12 MP with a dedicated driver. Thanks to a common oscillator and I2C transmission, cameras are fully synchronized. The module significantly expands the capabilities of Raspberry Pi in the area of camera support. It will be used in projects using stereo vision, 360 cameras or advanced surveillance systems.

Features

• ArduCAM Camarray HAT
  • Compatible with all versions of Raspberry Pi with a MIPI connector (Raspberry Pi 4 model B, Raspberry Pi 3 model B+, Raspberry Pi 3 model B, etc.) and Jetson Nano and Xavier NX
  • Four MIPI camera inputs and one MIPI output
  • Support for 1/2 line MIPI camera inputs up to 1 Gb/s
  • Supports 2-band MIPI output up to 1 Gbps
  • Supports RAW8/RAW10/RAW12 format
  • Support for the standard V4L2 platform, video nodes and controls
  • Support for Arducam RPI cameras up to 12 MP with a dedicated full resolution camera driver
  • Supports side-by-side cameras, switching channels 0 and 1 on the fly
  • Dimensions: 65 x 56 mm
• IMX708 camera
  • Resolution: 11.9 MP
  • Video modes: 1536 x 864 at 60 fps, 2304 x 1296 at 28 fps, 4608 x 2592 at 7 fps
  • Resolution: 4608 x 2592 pixels
  • Sensor image area: 6.45 x 3.63 mm (7.4 mm diagonal)
  • Pixel size: 1.4 μm × 1.4 μm
  • Optical size: 1/2.43"
  • Integrated infrared filter
  • CSI-2 2-lane output
  • Output format: RAW10
  • ISP support powered by Raspberry Pi
  • 2-lane MIPI CSI-2 camera interface
  • Autofocus
  • F.NO: F2.2
  • Field of View (FOV): 120°(D)x100°(H)x72°(V)
  • Focus adjustment: 10 cm to INF
  • Operating voltage 5V +/- 5%
  • Current: 700 mA
  • Dimensions: 24 x 25 mm

Kit contains

• 4 x IMX708 Autofocus Camera Module
• 1 x Arducam Camarray HAT
• 4 x 15cm 22pin Camera Cable
• 1 x 30cm 22pin Camera Cable
• 1 x 7cm 15-22pin Camera Cable
• 1 x Screw Pack