Eclypse Z7 (410-393) - development board with Zynq-7000 SoC
ID: 578097
zł3,121.91
Tax included
zł2,538.14 tax excl.
Evaluation kit with the Zynq-7000 APSoC chip integrating the ARM Cortex-A9 based processor with the Artix-7 FPGA chip. Provides two SYZYGY interface connectors enabling cooperation with fast modular systems. The set works under the control of Linux. Digilent Eclypse Z7 (410-393)
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Evaluation kit with the Zynq-7000 APSoC chip integrating the ARM Cortex-A9 based processor with the Artix-7 FPGA chip. It enables key hardware analysis and acceleration, while integrating processor, DSP and ASSP functions on one device.
Eclypse Z7 is a powerful platform for prototyping. Provides two SYZYGY interface connectors enabling cooperation with fast modular systems. It is a platform for research and rapid prototyping of test and measurement applications, including program-defined radio, ultrasound and medical devices.
The set works under the control of Linux. API software is included with the pre-built Linux images. The system allows new users to start working without interfering with the hardware configuration until required. The software supports many popular programming languages, including Python and C/C++.
Features
-
Zynq-7000 APSoC (XC7Z020-1CLG484C)
-
667 MHz dual-core Cortex-A9 processor
-
DDR3L memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports
-
High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
-
Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C
-
Programmable from JTAG, Quad-SPI flash, and microSD card
-
Programmable logic equivalent to Artix-7 FPGA
-
-
Memory
-
1 GiB DDR3L with 32-bit bus @ 1066 MT/s
-
16 MB Quad-SPI Flash with factory programmed 128-bit random number and 48-bit globally unique EUI-48/64™ compatible identifier
-
microSD card slot
-
-
Power
-
Powered from external 12V 5A supply
-
Platform MCU for configuration of adjustable power supplies and temperature management
-
-
USB and Ethernet
-
Gigabit Ethernet PHY
-
USB-JTAG programming circuitry
-
USB-UART bridge
-
USB micro AB port with USB 2.0 PHY with Host/Device/OTG capabilities
-
-
Zmod Ports
-
2 ports following the SYZYGY Standard interface specification
-
Compatible with a variety of SYZYGY pods, allowing for a wide variety of applications
-
Dedicated differential clocks for input and output
-
8 differential I/Os per port
-
16 single-ended I/Os per port
-
DNA interfaces connected to Platform MCU allowing for various auto-negotiated power supply configurations
-
-
Pmod Ports
-
2 twelve-pin ports for a total of 16 FPGA-connected I/Os
-
High speed voltage translation and protection circuitry
-
-
User GPIO
-
2 push-buttons
-
2 RGB LEDs
-
Connector description
- Board Indicator LEDs (LD4)
- Header for Case Power Switch
- Power Switch
- FPGA Fan Header
- Zynq-7000 SoC and FPGA Fan
- External JTAG Port
- SYZYGY Ports
- Pmod Ports
- User Buttons and LEDs
- DDR3L Memory
- Case Fan Header
- Programming Mode Select Jumper
- Reset Buttons (underside of board)
- microSD Card Slot
- USB JTAG/UART Port
- Ethernet Port
- USB AB Host/Device/OTG Port
- Power Supply Connector
Video presentation
Kit contains
- Eclypse Z7 Development Board
- FPGA fan
- USB A to Micro B programming cable
- USB A to Micro A cable
- 12V 5A power supply
- Digilent custom packaging
578097
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Digilent Genesys 2 board is an advanced, high-performance, ready-to-use digital circuit development platform based on the powerful Kintex-7™ Field Programmable Gate Array (FPGA) from Xilinx. 410-300
zł6,451.46 Delivery date unknown No product available!
MiniZed™ is a Zynq 7Z007S single-core development board. With the advent of the latest cost-optimized portfolio from Xilinx, this board targets entry-level Zynq developers with a low-cost prototyping platform.
Delivery date unknown No product available!
Development Kit Artix-7 256 MB DDR3L, 16 MB Quad-SPI flash memory, programming via JTAG
zł1,520.00 Delivery date unknown No product available!
Dual-channel ADC converter compatible with the SYZYGY standard. The module can simultaneously obtain two 25V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod Scope 1410-105 (410-396)
zł1,344.41 Delivery date unknown No product available!
Dual-channel DAC converter compatible with the SYZYGY standard. The module can simultaneously generate two 5V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod AWG 1411 410-397
zł647.15 Delivery date unknown No product available!
Other products in the same category (16)
Development kit with Artix-7 100T FPGA chip, compatible with the PC/104 standard. The set is equipped with 512 MB DDR3 memory, Zmod port and Pmod ports. Digilent 410-398
zł2,314.61 4 weeks No product available!
FPGA development board with Xilinx Spartan 6 chip. Equipped with PCIe interface and two 1Gb DDR3 SDRAM memories. Numato Lab FPGAPCIE0001B
zł2,975.05 6 weeks No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with a enclosure. Digilent 471-044
zł7,145.76 4 weeks No product available!
Ready-to-use development platform designed around the Zynq-7000 All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. Digilent 410-346-20
zł2,064.83 4 weeks No product available!
The Nexys Video features several components that make it ideal for developing audio/video applications. The Artix-7 XC7A200T FPGA is the most powerful chip from Xilinx\'s Artix-7 family. A Mini DisplayPort source provides the board with a uni-directional, high-bandwidth, low-latency audio/video channel. (410-316)
zł4,097.40 4 weeks No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036-2
zł3,770.38 4 weeks No product available!
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-02-325-2CF
zł2,950.12 6 weeks No product available!
Starter board with the XC3S500E FPGA from the Spartan-3E family from Xilinx. Waveshare Core3S500E
zł579.00 4 weeks No product available!
Module with Xilinx Kintex-7 XC7K160T-2IF chip, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-160-2IF
zł2,863.60 6 weeks No product available!
Module with Xilinx Artix-7 100T system, 32MB FLASH memory and 8MB HyperRAM memory. TE0725-03-100-2C
zł911.23 6 weeks No product available!
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3 SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1002-A
zł6,539.21 6 weeks No product available!
Base plate for Trenz Electronics 4x5 cm modules, e.g. TE0741, TE0712. The board allows connecting to the module interfaces: USB, Ethernet, JTAG. TE0705-04
zł1,269.83 6 weeks No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-100-2C3
zł1,458.99 6 weeks No product available!
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C
zł1,394.68 6 weeks No product available!
No product available!
Image processing kit on the ZedBoard development board. The kit includes a Zedboard board, an adapter and two Pcam cameras. Digilent 471-034
zł4,353.94 4 weeks No product available!
Evaluation kit with the Zynq-7000 APSoC chip integrating the ARM Cortex-A9 based processor with the Artix-7 FPGA chip. Provides two SYZYGY interface connectors enabling cooperation with fast modular systems. The set works under the control of Linux. Digilent Eclypse Z7 (410-393)