New products
New products New products
zł301.74
24h
Dostępny
Available
Available
zł59.04
24h
Available
Eclypse Z7 Bundle (471-036-2) - evaluation kit Eclypse Z7 + 2 x Zmod DAC 1411
ID: 579214
zł3,770.38
Tax included
zł3,065.35 tax excl.
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036-2
Description
Evaluation kit consisting of the Eclypse Z7 base board (ARM Cortex-A9 + FPGA Artix-7) and two Zmod DAC 1411 converter, which are plugged into the SYZYGY interface connector. It is a platform for research and rapid prototyping of test and measurement applications, including program-defined radio, ultrasound and medical devices.
The set consists of:
- Eclypse Z7 - evaluation kit with the Zynq-7000 APSoC chip integrating the ARM Cortex-A9 based processor with the Artix-7 FPGA chip. It enables key hardware analysis and acceleration, while integrating processor, DSP and ASSP functions on one device. Eclypse Z7 is a powerful platform for prototyping. Provides two SYZYGY interface connectors enabling cooperation with fast modular systems.
- 2 x Zmod DAC 1411 - a dual-channel DAC converter compatible with the SYZYGY standard. The module can simultaneously generate two 5 V signals with 14-bit resolution and sampling frequency up to 100 MS/s. Zmod DAC is based on the AD9717 chip.
Attention!
The Zmod ADC 1410 module is also compatible with the Eclypse Z7 base board, which is not included in the set. If the project requires a ADC converter, it must be purchased separately or a set in a different configuration should be selected.The set works under the control of Linux. API software is included with the pre-built Linux images. The system allows new users to start working without interfering with the hardware configuration until required. The software supports many popular programming languages, including Python and C/C++.
Manufacturer's documentation is available for the modules: Eclypse Z7, Zmod DAC.
Features
Eclypse Z7
-
Zynq-7000 APSoC (XC7Z020-1CLG484C)
-
667 MHz dual-core Cortex-A9 processor
-
DDR3L memory controller with 8 DMA channels and 4 High Performance AXI3 Slave ports
-
High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
-
Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C
-
Programmable from JTAG, Quad-SPI flash, and microSD card
-
Programmable logic equivalent to Artix-7 FPGA
-
-
Memory
-
1 GiB DDR3L with 32-bit bus @ 1066 MT/s
-
16 MB Quad-SPI Flash with factory programmed 128-bit random number and 48-bit globally unique EUI-48/64™ compatible identifier
-
microSD card slot
-
-
Power
-
Powered from external 12V 5A supply
-
Platform MCU for configuration of adjustable power supplies and temperature management
-
-
USB and Ethernet
-
Gigabit Ethernet PHY
-
USB-JTAG programming circuitry
-
USB-UART bridge
-
USB micro AB port with USB 2.0 PHY with Host/Device/OTG capabilities
-
-
Zmod Ports
-
2 ports following the SYZYGY Standard interface specification
-
Compatible with a variety of SYZYGY pods, allowing for a wide variety of applications
-
Dedicated differential clocks for input and output
-
8 differential I/Os per port
-
16 single-ended I/Os per port
-
DNA interfaces connected to Platform MCU allowing for various auto-negotiated power supply configurations
-
-
Pmod Ports
-
2 twelve-pin ports for a total of 16 FPGA-connected I/Os
-
High speed voltage translation and protection circuitry
-
-
User GPIO
-
2 push-buttons
-
2 RGB LEDs
-
Zmod DAC 1411
- Channels: 2
- Channel type: single-ended
- Resolution: 14-bit
- Absolute Resolution (amplitude ≤1.25V): 167μV
- Absolute Resolution (amplitude >1.25V): 665μV
- Output impedance: 50Ω
- Sample rate (real time): 100MS/s.
- AC amplitude (max): ±5 V.
- Analog bandwidth: 40 MHz @ 3dB, 20 MHz @ 0.5dB, 14 MHz @ 0.1dB
- Slew rate (2V step): 180V/μs
Video presentation
Kit contains
- Eclypse Z7 Development Board
- 2 x Zmod DAC 1411 module
- FPGA fan
- USB A to Micro B programming cable
- USB A to Micro A cable
- 12V 5A power supply
- Digilent custom packaging
579214
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Evaluation kit with the Zynq-7000 APSoC chip integrating the ARM Cortex-A9 based processor with the Artix-7 FPGA chip. Provides two SYZYGY interface connectors enabling cooperation with fast modular systems. The set works under the control of Linux. Digilent Eclypse Z7 (410-393)
zł3,121.91
Delivery date unknown
No product available!
Dual-channel ADC converter compatible with the SYZYGY standard. The module can simultaneously obtain two 25V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod Scope 1410-105 (410-396)
zł1,344.41
Delivery date unknown
No product available!
Dual-channel DAC converter compatible with the SYZYGY standard. The module can simultaneously generate two 5V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod AWG 1411 410-397
zł647.15
Delivery date unknown
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with converter Zmod ADC 1410 and Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036
zł3,572.25
Delivery date unknown
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod ADC 1410 plugged into the SYZYGY interface connector. Digilent 471-036-1
zł4,586.19
Delivery date unknown
No product available!
Black aluminum enclosure designed for Eclypse Z7 evaluation kits. It allows you to protect the set against mechanical damage, while creating a nice looking set. Digilent 250-132
zł316.28
Delivery date unknown
No product available!
Other products in the same category (16)
Basys3 is an entry-level FPGA board designed exclusively for the Vivado Design Suite, featuring Xilinx Artix 7-FPGA architecture. 410-183
zł744.14
24h
Available quantity: 5
Available
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3L SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1004-A
zł8,161.97
3 weeks
No product available!
TEBA0841 is a base plate for Trenz Electronic 4 x 5 modules, e.g. TE0741 series. The FPGA input / output ports can be connected directly to the periphery via two 50 pin goldpin connectors. TEBA0841-01
zł505.69
4 weeks
No product available!
The board features a Zynq XC7Z020, Ethernet, HDMI in/out, MIC in, Audio out, Arduino Interface, 2 Pmods, 16 pin GPIO header, user LEDs, pushbuttons and Switches. 6003-410-0
zł1,212.60
24h
Available quantity: 1
Available
Module with Xilinx Artix-7 200T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-02-200-2C
zł1,394.68
4 weeks
No product available!
HW-SPAR3E-SK-EU is an advanced FPGA evaluation kit featuring a Spartan-3E device and CPLD, providing a rich set of memory, peripheral interfaces, and diagnostic elements. Suitable for learning, embedded system prototyping, and designing advanced digital applications.
zł1,357.61
6 weeks
No product available!
Evaluation kit with Zynq Ultrascale + MPSoC chip, integrating ARM Cortex-A53, Cortex-R5 real-time processor, Mali-400 MP2 GPU and programmable logic. Provides a SYZYGY interface connector. Digilent 410-383-5EV
zł12,995.79
3 weeks
No product available!
Ready-to-use development platform designed around the Zynq-7000 All Programmable System-on-Chip (AP SoC) from Xilinx. The Zynq-7000 architecture tightly integrates a dual-core, 650 MHz ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. Digilent 410-346-20
zł1,330.29
3 weeks
No product available!
FPGA development board with Xilinx Kintex-7 FPGA chip with 4 GB DDR3 SDRAM memory. Equipped with a fast USB 3.1 interface. Numato Lab NLFX1002-B
zł16,029.90
3 weeks
No product available!
FPGA development board with Xilinx Kintex-7 chip with 4 GB DDR3L SDRAM memory. Equipped with a fast PCIe interface. Numato Lab FPGA014C
zł24,487.93
3 weeks
No product available!
FPGA Evaluation Kit based on the XC7A50T-1CSG324C chip from the Artix-7 FPGA Xilinx family. Nexys works with Xilinx ISE and Vivado software . Equipped with numerous interfaces and sensors allows you to develop projects without attaching additional elements to the set. Digilent 410-292-1
zł1,794.74
3 weeks
No product available!
Image processing kit on the ZedBoard development board. The kit includes a Zedboard board, an adapter and two Pcam cameras. Digilent 471-034
zł4,353.94
3 weeks
No product available!
Development kit with Xilinx Spartan-6 FPGA. Equipped with displays, buttons, audio and video outputs and a breadboard. Numato Lab WXDE001
zł1,642.09
3 weeks
No product available!
Development kit with Xilinx Artix 7 FPGA. Equipped with display, buttons, video outputs, Ethernet and microSD slot. Numato Lab NLFX1001
zł1,254.40
3 weeks
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with enclosure. Digilent 471-042
zł9,472.25
24h
Available quantity: 1
Available
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-100-2C
zł1,947.39
4 weeks
No product available!
Eclypse Z7 evaluation kit (ARM Cortex-A9 + FPGA Artix-7) with two converter Zmod DAC 1411 plugged into the SYZYGY interface connector. Digilent 471-036-2